Horio Posted July 1, 2011 Report Posted July 1, 2011 I'm starting to feel sorry for Lil Knight. This board run has become huge, and mailing out this many boards is going to become quite a bit of work...
El_Doug Posted July 1, 2011 Report Posted July 1, 2011 I'm starting to feel sorry for Lil Knight. This board run has become huge, and mailing out this many boards is going to become quite a bit of work... I'm sure we'll come up with a nice way to thank him
Horio Posted July 1, 2011 Report Posted July 1, 2011 I'm sure we'll come up with a nice way to thank him We definitely should, as this board run is a great service to us DIY'ers. Thanks Lil Knight!
Lil Knight Posted July 1, 2011 Author Report Posted July 1, 2011 (edited) I can't believe we are reaching 100 sets of KGSSHV... What a number! Since we have different kinds of boards, I'll try to call the PCB factory to talk about this. I'm hoping for a 'stable' price for each kind. Wouldn't be nice if the KGSSHV boards' price is low, but the Dynafet's is extremely high. If everything goes as my expectation, the boards should be in everybody's hands within 5 weeks from now. That's quite optimistic though. Shipping time may vary a lot. Somebody has to start begging Dr Gilmore to do a run for the teflon Stax jacks.... *run away* Edited July 1, 2011 by Lil Knight
luvdunhill Posted July 1, 2011 Report Posted July 1, 2011 Please make a prototype and have someone test it. 100 boards is too big of a risk in my opinion.
Emooze Posted July 1, 2011 Report Posted July 1, 2011 Agreed. A extra wait to ensure that the boards are perfect is well worth it.
kevin gilmore Posted July 1, 2011 Report Posted July 1, 2011 (edited) No way i have enough time to make that many more stax jacks. Here is the design http://gilmore.chem.northwestern.edu/staxout3.pdf Should be about $7 when made in quantity in china. original kgsshv amp board with on board heatsinks known to work perfectly with single fets, and upside down dual fet, new version should be checked for errors. someone needs to check the side mount kgsshv amp board for errors just in case i messed something up when i pushed stuff around. someone needs to check the power supply board against the schematic to make sure i did not make any mistakes there either. prototype run for kgsshv power supply not a bad idea. prototype run for dynahi/dynafet power supply also not a bad idea. Edited July 1, 2011 by kevin gilmore
DouglasQuaid Posted July 1, 2011 Report Posted July 1, 2011 (edited) Guess it's time to start that DIY Time Dilator thread you've been dreaming about. Libya's in shambles... probably wouldn't be too hard to get some plutonium now. Edited July 1, 2011 by DouglasQuaid
luvdunhill Posted July 1, 2011 Report Posted July 1, 2011 known to work perfectly with single fets, and upside down dual fet, new version should be checked for errors. there should also be a definition and agreement of 'working perfectly'. Does that mean plays music, or is there some sort of technical meaning to the phrase?
minivan Posted July 1, 2011 Report Posted July 1, 2011 how are we going to source enough 2sa1968 and lsk386 for that number of boards?
digger945 Posted July 1, 2011 Report Posted July 1, 2011 (edited) KGSSHV Edited to reflect Kevin's post below. Edited July 2, 2011 by digger945
kevin gilmore Posted July 1, 2011 Report Posted July 1, 2011 (edited) Thats an older schematic with the stacked 600 volt parts. here is the current one. http://gilmore.chem.northwestern.edu/kgsshvproduction.pdf lsk389 are current production parts. 2sa1968's may be a bit of trouble, you can use the ixys parts instead. Edited July 1, 2011 by kevin gilmore
kevin gilmore Posted July 1, 2011 Report Posted July 1, 2011 there should also be a definition and agreement of 'working perfectly'. Does that mean plays music, or is there some sort of technical meaning to the phrase? Somehow in the many versions of the boards, the dual fet ended up upside down. Absolutely no idea how that happened. The board works fine and i've been listening to it for months now. When i pushed components around to shrink the side mount board, i may have made a mistake, or re-routed something to the wrong place so its a better idea for someone to check against the schematic. After working on all the boards for so long, i can easily miss a mistake that would be obvious to anyone that just looked at it for 15 minutes. I must have spent 100 hours on the attenuator board. I'm glad that one came out perfect because with 6 layers, a mistake in the middle is not repairable. When i go to bed at night and close my eyes, if i still see the board layout, its time to give it a break for a week or two. The blue polution really is a problem.
justin Posted July 2, 2011 Report Posted July 2, 2011 i would be willing to place an order to have the teflon stax jacks machined, if someone can locate the pins at the right price
justin Posted July 2, 2011 Report Posted July 2, 2011 I must have spent 100 hours on the attenuator board. I'm glad that one came out perfect because with 6 layers, a mistake in the middle is not repairable. you mean you didnt do the whole thing in 12 hours like the guy who does the other guys "Gerber files"?
luvdunhill Posted July 2, 2011 Report Posted July 2, 2011 Somehow in the many versions of the boards, the dual fet ended up upside down. Absolutely no idea how that happened. The board works fine and i've been listening to it for months now. When i pushed components around to shrink the side mount board, i may have made a mistake, or re-routed something to the wrong place so its a better idea for someone to check against the schematic. After working on all the boards for so long, i can easily miss a mistake that would be obvious to anyone that just looked at it for 15 minutes. I must have spent 100 hours on the attenuator board. I'm glad that one came out perfect because with 6 layers, a mistake in the middle is not repairable. When i go to bed at night and close my eyes, if i still see the board layout, its time to give it a break for a week or two. The blue polution really is a problem. that's not at all my point. I'm clearly in the minority here, so I'll just stay out of it.
Hung Posted July 2, 2011 Report Posted July 2, 2011 i would be willing to place an order to have the teflon stax jacks machined, if someone can locate the pins at the right price http://cgi.ebay.com/...b#ht_1683wt_900
vvs_75 Posted July 2, 2011 Report Posted July 2, 2011 http://cgi.ebay.com/...b#ht_1683wt_900 Just got today few of these from this seller, they are nice quality and they look even better than in his pictures.
ujamerstand Posted July 2, 2011 Report Posted July 2, 2011 i would be willing to place an order to have the teflon stax jacks machined, if someone can locate the pins at the right price Try to contact CMC audio directly for a quote, they might be able to give you a better price than wonderco_buy.
kevin gilmore Posted July 2, 2011 Report Posted July 2, 2011 (edited) you mean you didnt do the whole thing in 12 hours like the guy who does the other guys "Gerber files"? I'm sure the first version only took about 4 hours. But there were 19 different versions. 2 layer, 4 layer, 6 layer all parts on one side, parts on both sides... (REALLY, 19 different versions i have them all) I did not keep track of the time, but i may have more hours in the attenuator board than the T2 board set. Wait a minute... Isn't this the same guy that says his gerber files cost tens of thousands of dollars to produce? Or did things suddenly get cheaper. Edited July 2, 2011 by kevin gilmore
justin Posted July 2, 2011 Report Posted July 2, 2011 I'm sure the first version only took about 4 hours. But there were 19 different versions. 2 layer, 4 layer, 6 layer all parts on one side, parts on both sides... (REALLY, 19 different versions i have them all) I did not keep track of the time, but i may have more hours in the attenuator board than the T2 board set. Wait a minute... Isn't this the same guy that says his gerber files cost tens of thousands of dollars to produce? Or did things suddenly get cheaper. the files cost tens of thousands, but the labor is cheap
justin Posted July 2, 2011 Report Posted July 2, 2011 Try to contact CMC audio directly for a quote, they might be able to give you a better price than wonderco_buy. im not familiar with either of these names, or the part #
Lil Knight Posted July 2, 2011 Author Report Posted July 2, 2011 (edited) CMC is the company that make those teflon tube sockets: http://www.cmc-audio...-sockets-c.html I just sent them an email asking about the pricing for those pins. Hopefully it'd be cheaper than buying from the guy on fleabay. Also, according to their FAQ, they can do OEM connectors. Not sure if they could make the Stax jacks though. Edited July 2, 2011 by Lil Knight
MASantos Posted July 2, 2011 Report Posted July 2, 2011 I'm in for 2 sets of KGSSHV, 1 onboard, 1 offboards. Regarding the transformer, I assume people are going with SumR? If we agree with on a configuration with dual primaries for 110/220V we might get a good price as to people buying seperately.
Recommended Posts