dcpoor Posted June 11, 2010 Report Share Posted June 11, 2010 has any conclusion been reached on whether the ALO cable was incorrectly wired? ken's irritated over at hf. heh. Audeze LCD-2 Orthos - Page 114 - Head-Fi.org Community Ed, dammit would you stop spewing this? THE CABLE WAS WIRED CORRECTLY!! Sankar told me this several days ago and asked me to hold off until they could do some tests on their dummy head to see if there was a potential problem elsewhere and formulate a reply which they are doing now. Please you have ZERO evidence that the cable was wired out of anything. So stop it. You are like a broken record on that impressions thread. Take a gander at the measurements that Tyll just posted HERE Take a look also at the HD800. Jesus! Ken Quote Link to comment Share on other sites More sharing options...
faust3d Posted June 11, 2010 Report Share Posted June 11, 2010 Not for distribution.... edit, replaced image... It measures/tests really well. Nice. Quote Link to comment Share on other sites More sharing options...
Smeggy Posted June 11, 2010 Report Share Posted June 11, 2010 Woah, that's nice. I'd like to see one for the HE-5 to see if the orthos follow a trend with measurements. Quote Link to comment Share on other sites More sharing options...
n_maher Posted June 11, 2010 Report Share Posted June 11, 2010 Hopefully Tyll doesn't care... Quote Link to comment Share on other sites More sharing options...
n_maher Posted June 11, 2010 Report Share Posted June 11, 2010 And just for you Gary... Quote Link to comment Share on other sites More sharing options...
Beefy Posted June 11, 2010 Report Share Posted June 11, 2010 Wow, the HE-5 rings (and decays) a huge amount on both of the square waves...... Quote Link to comment Share on other sites More sharing options...
Smeggy Posted June 11, 2010 Report Share Posted June 11, 2010 (edited) just seen the set of graphs posted, the audeze kills all. mine looks distinctly lumpy Edited June 11, 2010 by Smeggy Quote Link to comment Share on other sites More sharing options...
mypasswordis Posted June 11, 2010 Report Share Posted June 11, 2010 (edited) Well, iirc Colin's pair looked a fair amount better, but he retuned the damping beforehand. And is it me or is the LCD2 down 20dB at just before 15kHz? Edited June 11, 2010 by mypasswordis Quote Link to comment Share on other sites More sharing options...
Edwood Posted June 11, 2010 Report Share Posted June 11, 2010 has any conclusion been reached on whether the ALO cable was incorrectly wired? ken's irritated over at hf. heh. Audeze LCD-2 Orthos - Page 114 - Head-Fi.org Community Likely not. I don't think anyone actually took a multimeter to the ALO cable to check for sure. Tyll was in a hurry to finish other tests. I think he did test a stock wired one though, so if it measures significantly differently, it would be a better indicator. But as of now, no one's actually 100% sure. All I know, the ALO wired LCD-2 was the only LCD-2 I had time to listen to, and it sounded off. The soundstage and imaging was not right. There was extreme left and right channel separation, like there was a big hole in the middle. And my SVS test tracks were even more off, which tells me it's a phase problem. As to what's causing it is not conclusive. But I keep thinking of Occum's Razor... -Ed Quote Link to comment Share on other sites More sharing options...
penger Posted June 11, 2010 Report Share Posted June 11, 2010 Well, iirc Colin's pair looked a fair amount better, but he retuned the damping beforehand. And is it me or is the LCD2 down 20dB at just before 15kHz? Would have been interesting to see the variance among multiple pairs of HE-5's. Quote Link to comment Share on other sites More sharing options...
Silenced Posted June 11, 2010 Report Share Posted June 11, 2010 would be hilarious if ALO actually made them worse headphones. Then they would be expensive way to degrade your headphones. Quote Link to comment Share on other sites More sharing options...
Kabeer Posted June 11, 2010 Report Share Posted June 11, 2010 And just for you Gary... Swt61's pair was retuned by dBel84 i think. Whose is the other pair? Is that colins? Also to me the 'compensated' graphs make more sense they seem to tell a truer story. Quote Link to comment Share on other sites More sharing options...
swt61 Posted June 11, 2010 Author Report Share Posted June 11, 2010 Likely not. I don't think anyone actually took a multimeter to the ALO cable to check for sure. Tyll was in a hurry to finish other tests. I think he did test a stock wired one though, so if it measures significantly differently, it would be a better indicator. But as of now, no one's actually 100% sure. All I know, the ALO wired LCD-2 was the only LCD-2 I had time to listen to, and it sounded off. The soundstage and imaging was not right. There was extreme left and right channel separation, like there was a big hole in the middle. And my SVS test tracks were even more off, which tells me it's a phase problem. As to what's causing it is not conclusive. But I keep thinking of Occum's Razor... -Ed As I've stated already I listened to stock and ALO cabled pairs on Cavalli's new amp. The stock definitely sounded noticeably better to me, and I said so to Alex. The stock pair sounded phenomenal BTW. Quote Link to comment Share on other sites More sharing options...
mypasswordis Posted June 11, 2010 Report Share Posted June 11, 2010 Swt61's pair was retuned by dBel84 i think. Whose is the other pair? Is that colins? Also to me the 'compensated' graphs make more sense they seem to tell a truer story. It's probably Colin's since I know his was measured. I covered up one of the vents with my fingers on swt61's pair of TPs like I did Colin's before he plugged one up on his and it sounded a lot better. The bottom ones are the five measurements that Tyll took, each with a slightly different positioning on the dummy head. Quote Link to comment Share on other sites More sharing options...
dBel84 Posted June 11, 2010 Report Share Posted June 11, 2010 I believe they were Colin's too. The damping scheme is near identical. As for the ALO cable thing, they sounded different in a positive way in the brief session that I had with the cables vs stock. I did most of my evaluation with the stock cables and loved the headphone. and now I wait for the Seattle postman to deliver and the smegster to recover from the nitrates..dB Quote Link to comment Share on other sites More sharing options...
Smeggy Posted June 11, 2010 Report Share Posted June 11, 2010 finger crossed they're already there Quote Link to comment Share on other sites More sharing options...
Edwood Posted June 11, 2010 Report Share Posted June 11, 2010 Eagerly awaiting Thunderpants Modifications... Quote Link to comment Share on other sites More sharing options...
swt61 Posted June 11, 2010 Author Report Share Posted June 11, 2010 The two TPs measured were mine and Colin's. Quote Link to comment Share on other sites More sharing options...
mypasswordis Posted June 11, 2010 Report Share Posted June 11, 2010 I believe they were Colin's too. The damping scheme is near identical. Near identical to what? Quote Link to comment Share on other sites More sharing options...
dBel84 Posted June 11, 2010 Report Share Posted June 11, 2010 each other - i sent colin the scheme i finally used on steve's ..dB Quote Link to comment Share on other sites More sharing options...
swt61 Posted June 12, 2010 Author Report Share Posted June 12, 2010 Don you have no idea how popular they were. Marc, Duggeh and Birgir absolutely loved them, as did most who found time to listen. Quote Link to comment Share on other sites More sharing options...
digger945 Posted June 12, 2010 Report Share Posted June 12, 2010 Especially your memory foam pads Steve. Very comfy and form fitting. I listened to yours with manaox using Justin's GS-1/sony cdp and it was out of this world. I wanted to hog 'em so bad but others were waiting to listen. On the hp graphs. Where is the one showing the input signal to make sure it doesn't change throughout the sweep? I can't test anything without one channel on the scope showing the input. It's the main reason for my upgrading function gens. Quote Link to comment Share on other sites More sharing options...
Dusty Chalk Posted June 12, 2010 Report Share Posted June 12, 2010 ... memory foam pads...I don't think it registered before that someone was using memory foam for their pads -- that sounds excellent. Quote Link to comment Share on other sites More sharing options...
dBel84 Posted June 12, 2010 Report Share Posted June 12, 2010 I don't think it registered before that someone was using memory foam for their pads -- that sounds excellent. lol they generally aren't , I made up a few and happen to have had steve's TP's at the time so I retrofitted the O2 pads with a memory liner - made them conform just enough for a good fit. I am not surprised that folk liked them , I sure did. ..dB Quote Link to comment Share on other sites More sharing options...
swt61 Posted June 12, 2010 Author Report Share Posted June 12, 2010 They are really, really comfy! I really liked them on Justin's GS-1/sony cdp too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.