spritzer Posted October 31, 2007 Report Posted October 31, 2007 The trick with the old pads is to try and get all of the glue off with the pads which is easy with the oldest pads but gets harder with the newer versions of glue. I ripped off the pads on my new-ish Airbow SC1 and no amount of solvents could completely clean the baffle. Using chemicals this close to the driver is pretty bad for my ulcer... :'(
postjack Posted October 31, 2007 Report Posted October 31, 2007 The trick with the old pads is to try and get all of the glue off with the pads which is easy with the oldest pads but gets harder with the newer versions of glue. I ripped off the pads on my new-ish Airbow SC1 and no amount of solvents could completely clean the baffle. Using chemicals this close to the driver is pretty bad for my ulcer... :'( Ack, sounds like it will be a project then. I'll give them a listen with the cracked pads, and if I like them enough I'll put the new pads on. Otherwise they'll be off to their new owner pads unreplaced.
postjack Posted October 31, 2007 Report Posted October 31, 2007 Bastard... Why am I a bastard? :'( [me=postjack]cries[/me]
grawk Posted October 31, 2007 Report Posted October 31, 2007 Why am I a bastard? :'( [me=postjack]cries[/me] Because your daddy couldn't take it anymore...
spritzer Posted October 31, 2007 Report Posted October 31, 2007 Why am I a bastard? :'( [me=postjack]cries[/me] For dropping the tough work in somebody else's lap... Like your daddy did.... ...
spritzer Posted October 31, 2007 Report Posted October 31, 2007 Awesome sequence of posts there. It is... now back to some Stax talk... The Lambda pads are still easy compared to either of the Omegas. The O1 has these nasty little plastic snaps with a pin in the middle and the pads are so badly made it pretty hard to put them on the right way. The SR-007 has this clever rotating system which needs to me mounted inside the pads and then the pads can be forced over the metal back plate. Be prepared for some cuts and scrapes..
Elephas Posted November 1, 2007 Report Posted November 1, 2007 Here's a link to a Japanese-language page showing photos of an SR-Omega with W1000 earpads installed. http://plaza.rakuten.co.jp/staxt2/diary/200611170000/
Nanoha Posted November 1, 2007 Report Posted November 1, 2007 Here's a link to a Japanese-language page showing photos of an SR-Omega with W1000 earpads installed. http://plaza.rakuten.co.jp/staxt2/diary/200611170000/ Oh snap. Very cool.
spritzer Posted November 1, 2007 Report Posted November 1, 2007 http://www.stax.co.jp/Pdf/Export/SR007MK2-brochure-s.pdf The SR-007 Mk2 has been released! It's too bad it is an export model only so no cheap prices through EIFL.
postjack Posted November 1, 2007 Report Posted November 1, 2007 http://www.stax.co.jp/Pdf/Export/SR007MK2-brochure-s.pdf The SR-007 Mk2 has been released! It's too bad it is an export model only so no cheap prices through EIFL. I wrote Elusive Disc, and they'll be getting them in stock early next week. I'm waiting on a price check.
spritzer Posted November 1, 2007 Report Posted November 1, 2007 It really sucks that we can't get them from Japan. Stupid Stax and their dealer policy...
n_maher Posted November 1, 2007 Report Posted November 1, 2007 I wrote Elusive Disc, and they'll be getting them in stock early next week. I'm waiting on a price check. I'm sure we'll all be interested to hear the results of the price check, not that I have any $$ to invest in stats right now.
Dusty Chalk Posted November 1, 2007 Report Posted November 1, 2007 It's too bad it is an export model only so no cheap prices through EIFL. What does that mean? Is the reason things are cheaper through places like EIFL, audiocubes, and the pricejapan network of retailers because they're being sold domestically (in Japan) and then being shipped to us? Why would that be cheaper than being sold to us directly?
spritzer Posted November 1, 2007 Report Posted November 1, 2007 What does that mean? Is the reason things are cheaper through places like EIFL, audiocubes, and the pricejapan network of retailers because they're being sold domestically (in Japan) and then being shipped to us? Why would that be cheaper than being sold to us directly? You have to buy this model through the distributors and they all very eager to add their cut to the price. They would be around 150000YJP in Japan but well over 2k$ in the US. Its even worse on this side of the "lake" due to the VAT.
postjack Posted November 2, 2007 Report Posted November 2, 2007 Price of the new Mk2 at elusivedisc is the same as the old 007, which is listed at $2,000.
n_maher Posted November 2, 2007 Report Posted November 2, 2007 Price of the new Mk2 at elusivedisc is the same as the old 007, which is listed at $2,000. Wonder if that'll drive used prices up or down. I'm sure anyone selling a pair will make claims that the new model is inferior blah blah and the other side will say the opposite. Drama ftw.
Iron_Dreamer Posted November 2, 2007 Report Posted November 2, 2007 Well the new model certainly LOOKS nicer. As long as it doesn't sound worse, I'm in....someday.
spritzer Posted November 2, 2007 Report Posted November 2, 2007 Thanks for the price check. There is supposed to be a silver version for Japan only that is released in December. It looks pretty much like the SR-007BL but with a better finish on the cups and we shpuld be able to get that at the normal 1500$ price. The black version does look great though.
postjack Posted November 2, 2007 Report Posted November 2, 2007 Thanks for the price check. There is supposed to be a silver version for Japan only that is released in December. It looks pretty much like the SR-007BL but with a better finish on the cups and we shpuld be able to get that at the normal 1500$ price. The black version does look great though. Ah, this is cool. The spy pictures of the silver sure looked snazzy. In other news, I get my Lambdas today. I'll get my first listen late tonight.
postjack Posted November 2, 2007 Report Posted November 2, 2007 http://www.elusivedisc.com/prodinfo.asp?number=STXSR007B
spritzer Posted November 2, 2007 Report Posted November 2, 2007 I'm simply not willing to pay 500$ extra for US warranty I have no use for so I'm going to see what happens in the next month. What I really need is some nice CDP to buy or an amp so I wont get tempted...
justin Posted November 2, 2007 Report Posted November 2, 2007 What about the "new contoured earpads"?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now