dc Posted June 5, 2008 Report Posted June 5, 2008 Team budget stax ftw! I've all but given up on the sigma pros, few and far between and asking prices are daylight robbery when you do happen upon one
The Monkey Posted June 5, 2008 Report Posted June 5, 2008 SRM1/MKII in the house tomorrow, along with a Lambda Pro to go with the Signatures. So from no Stax to lotsa Stax in no time flat. I look forward to posting impressions tomorrow.
Smeggy Posted June 5, 2008 Report Posted June 5, 2008 SRM1/MKII in the house tomorrow, along with a Lambda Pro to go with the Signatures. So from no Stax to lotsa Stax in no time flat. I look forward to posting impressions tomorrow. Exciting times, I loves all my staxes. I get the distinct impression I'll end up totally planar at some point.
Tachikoma Posted June 5, 2008 Report Posted June 5, 2008 I've always been on team budget stax since my first >$100 headphone purchase I keep telling myself that I don't have nearly enough amplification to justify dropping moolah on an O2, and I usually listen... until a pair appeared on YJ for 85000 yen BIN this morning :x
Smeggy Posted June 5, 2008 Report Posted June 5, 2008 Damn Tachikoma, that's cheap. Good find, although we'll now have to shun you and expel you from team budget Stax.
guzziguy Posted June 5, 2008 Report Posted June 5, 2008 Damn Tachikoma, that's cheap. Good find, although we'll now have to shun you and expel you from team budget Stax. Especially when he succumbs to the siren song of the BHSE.
GPH Posted June 5, 2008 Report Posted June 5, 2008 Wow, that's probably the cheapest I've seen for Omega II. Good catch. And don't worry, we welcome you with open arms in the Head-case OII/FOTM team.
Tachikoma Posted June 5, 2008 Report Posted June 5, 2008 Especially when he succumbs to the siren song of the BHSE. Only if the USD trades on par with the RM
Tachikoma Posted June 5, 2008 Report Posted June 5, 2008 By the end of next month, this: http://gilmore.chem.northwestern.edu/head3.htm ... I hope. If it still isn't ready by then, I'll have to stick to my T1, and perhaps the SRD-7mk2 (with only a somewhat faulty Pioneer SA-6200 behind it.)
Tachikoma Posted June 5, 2008 Report Posted June 5, 2008 Its just hiss in the outputs, caused by shipping damage. Getting it repaired will cost a lot more than the amp <.<
spritzer Posted June 5, 2008 Report Posted June 5, 2008 I really think it's the amp that makes or breaks the O2. Using the transformer it's anything but polite even at lower listening volume. I remember the same thing when I heard it with a KGSS. The phones are simply bad running from something like the 007t though the familiar traits do shine on through the blandness. Funnily enough, I want to try the Sigma Pro before the Omegas. The Sigmas are too wacky to ignore. Screw the Sigma Pro's and go for a SR-Sigma 404. If I manage to find a cheap Sigma and SR-303/404 I'll build one and send it on tour of the US.
The Monkey Posted June 5, 2008 Report Posted June 5, 2008 SRM1/MKII in the house tomorrow, along with a Lambda Pro to go with the Signatures. So from no Stax to lotsa Stax in no time flat. I look forward to posting impressions tomorrow. In da house. The amp is a little dinged up (fully disclosed in the auction), but the Lambda Pros are in as-new condition. The guy I bought them from has an audio store and they found the stuff during a move. Even the foam was fully intact. Until I touched it and it started to disintegrate. Does that say something about me or the phones? Impressions to come...
Voltron Posted June 5, 2008 Report Posted June 5, 2008 In da house. The amp is a little dinged up (fully disclosed in the auction), but the Lambda Pros are in as-new condition. The guy I bought them from has an audio store and they found the stuff during a move. Even the foam was fully intact. Until I touched it and it started to disintegrate. Does that say something about me or the phones? Impressions to come... Congrats on the new amp and crumbly cans Vincent. If I don't sell it soon, maybe for fun I should send you the ED-1 EQ-type deal that pairs up with the SRM-1/MkII. Has an interesting effect on the sound. Sometimes good, sometimes bad. Good thing it has a bypass switch!
spritzer Posted June 5, 2008 Report Posted June 5, 2008 Congrats on the new amp and crumbly cans Vincent. If I don't sell it soon, maybe for fun I should send you the ED-1 EQ-type deal that pairs up with the SRM-1/MkII. Has an interesting effect on the sound. Sometimes good, sometimes bad. Good thing it has a bypass switch! Could you open up the ED-1 and post some pics of the innards for us? We've been looking for the schematic but haven't been able to find it so it would be cool to see what Stax was doing.
The Monkey Posted June 6, 2008 Report Posted June 6, 2008 Gang, Need some help here. My Sigs are playing only out of the left channel. The amp is fine, tested with the Lambda Pros. Seller, who seems like an honest guy, said they were fine before I bought. He did remove the foam that had deteriorated before shipping. Is there anything I should check first before contacting the seller? I've never taken apart a Stax phone before.
deepak Posted June 6, 2008 Report Posted June 6, 2008 Gang, Need some help here. My Sigs are playing only out of the left channel. The amp is fine, tested with the Lambda Pros. Seller, who seems like an honest guy, said they were fine before I bought. He did remove the foam that had deteriorated before shipping. Is there anything I should check first before contacting the seller? I've never taken apart a Stax phone before. Is this the first time you're hearing the Sigs or is this just happening with your new amp? (sorry I can't remember if you've tested the Sigs before or not)
The Monkey Posted June 6, 2008 Report Posted June 6, 2008 Gang, Need some help here. My Sigs are playing only out of the left channel. The amp is fine, tested with the Lambda Pros. Seller, who seems like an honest guy, said they were fine before I bought. He did remove the foam that had deteriorated before shipping. Is there anything I should check first before contacting the seller? I've never taken apart a Stax phone before. Check that. It IS the amp (SRM-1/MK-2). Worked fine for a while, but now it is pretty darn hot and the right channel is out with only an occasional faint buzzing. Advice appreciated.
The Monkey Posted June 6, 2008 Report Posted June 6, 2008 Check that. It IS the amp (SRM-1/MK-2). Worked fine for a while, but now it is pretty darn hot and the right channel is out with only an occasional faint buzzing. Advice appreciated. Sweet Lord Jesus am I stupid. I didn't realize the volume knob controlled the channels individually.
deepak Posted June 6, 2008 Report Posted June 6, 2008 Sweet Lord Jesus am I stupid. I didn't realize the volume knob controlled the channels individually. One of the many quirks about Stax amps, the dual volume control using the same knob
The Monkey Posted June 6, 2008 Report Posted June 6, 2008 Oy, maybe I'm not so stupid after all. I can get the level up on the right channel a little better, but definitely not where it should be. Help.
The Monkey Posted June 6, 2008 Report Posted June 6, 2008 Ok, plot thickens. I just switched reconnected the RCAs to the second input on the amp (Source is DAC1). And now it works fine. Any thoughts?
Voltron Posted June 6, 2008 Report Posted June 6, 2008 Ok, plot thickens. I just switched reconnected the RCAs to the second input on the amp (Source is DAC1). And now it works fine. Any thoughts? Sorry it is a hassle. Might want to open it up and check the connections on the first input. I have had broken wires on RCAs and it will work fine, then not, then a little because the connection is sometimes made. Could you open up the ED-1 and post some pics of the innards for us? We've been looking for the schematic but haven't been able to find it so it would be cool to see what Stax was doing. I could probably give it a shot.
The Monkey Posted June 6, 2008 Report Posted June 6, 2008 Sorry it is a hassle. Might want to open it up and check the connections on the first input. I have had broken wires on RCAs and it will work fine, then not, then a little because the connection is sometimes made. Yeah, good suggestion, will do. The box looks like it has been opened a few times before. Anyone have any mod suggestions while I'm pokin' around in there?
deepak Posted June 6, 2008 Report Posted June 6, 2008 Yeah, good suggestion, will do. The box looks like it has been opened a few times before. Anyone have any mod suggestions while I'm pokin' around in there? Nail polish over the FETs.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now