jdkJake Posted October 19, 2010 Report Posted October 19, 2010 Does anyone have any idea of where to find some of these, or something else that would work for the same purpose, but with threads for screwing them to a bottom plate from the bottom? Home depot has those same tie downs. Quote
jdkJake Posted October 19, 2010 Report Posted October 19, 2010 I would have added this via edit, but not working correctly for some reason. At home depot, these are Gardner Bender mounting bases. Come in white or black. Quote
guzziguy Posted October 19, 2010 Report Posted October 19, 2010 Here, you have a 15 minute window after post creation to make any edits. Quote
Nebby Posted October 19, 2010 Report Posted October 19, 2010 I would have added this via edit, but not working correctly for some reason. At home depot, these are Gardner Bender mounting bases. Come in white or black. But do the ones at home depot have threads? Quote
jdkJake Posted October 19, 2010 Report Posted October 19, 2010 Thanks for the edit tip. I did not know that. No, these do not have threads. I read the original post to say parts like those above or something similar but with threads. I now see it could have been read as only looking for those parts or similar but with threads. Quote
Looser101 Posted October 19, 2010 Report Posted October 19, 2010 How about using a nut and bolt on one of these? [ATTACH=CONFIG]3784[/ATTACH] Spectro Wire and Cable: Mounts for Cable Ties Quote
mypasswordis Posted October 25, 2010 Report Posted October 25, 2010 Random q - Looking for stuff to fill my drawers with so I don't have to mail order parts every time I want to build something. Do these resistors look okay? Are they OEM for some real brand or are they just crap? 1/4W 0.25W 1% Metal Film Resistor Kit 2500pcs 50 values - eBay (item 260598923005 end time Nov-03-10 11:37:59 PDT) Quote
spritzer Posted October 25, 2010 Report Posted October 25, 2010 I bought something similar a while back and I have no complaints. My Exstata uses these almost exclusively with no issues. Beats the hell out of paying 15cents for one generic resistor at the local store... Quote
mypasswordis Posted October 26, 2010 Report Posted October 26, 2010 Cool, sounds good, since I guess I'm about to buy a bunch of 10pF and 100pF silver mica caps and probably some other goodies from the same seller. Quote
spritzer Posted October 26, 2010 Report Posted October 26, 2010 Hehe crazy ideas like that means you end up with parts all over the place and you have no idea when you bought some of them.... Quote
luvdunhill Posted December 9, 2010 Report Posted December 9, 2010 in your opinion, what's a reasonable connector to use with DSD and other serial audio signals. cat-5? Assume that the runs will be very short, and proper precautions are taken on each end of the connector. Quote
luvdunhill Posted December 9, 2010 Report Posted December 9, 2010 and one more question... how the hell do you know how far off the PCB the center of the large mounting hole is for these? Neutrik - Audio - A Series - NC3MAH-0 I suppose you have to load the DXF file? bah. I don't have a way to do that... Quote
n_maher Posted December 9, 2010 Author Report Posted December 9, 2010 I can help with the dxf if you can wait a few days. Quote
luvdunhill Posted December 9, 2010 Report Posted December 9, 2010 I can help with the dxf if you can wait a few days. sure. seriously though, I cannot believe that dimension isn't on the PDF. how lame. Quote
n_maher Posted December 9, 2010 Author Report Posted December 9, 2010 I also need to order a few resistors, if I can get my act together... Quote
dsavitsk Posted December 9, 2010 Report Posted December 9, 2010 sure. seriously though, I cannot believe that dimension isn't on the PDF. how lame. It looks like 12.5mm to me ... Quote
luvdunhill Posted December 9, 2010 Report Posted December 9, 2010 It looks like 12.5mm to me ... I'm pretty sure that dimension is just the distance from the center to the outer edge of the mounting hole. If you then look at the far left diagram, the PCB seating plane looks higher than that. Quote
dsavitsk Posted December 9, 2010 Report Posted December 9, 2010 The mounting hole has depth, so unless you are cutting a gouge in the PCB to accommodate it, then the board can't be any higher. Also there are some little feet on the other side that are at the same level as the edge of the mounting hole. Quote
studeb Posted December 10, 2010 Report Posted December 10, 2010 those feet run the whole way front to back on both sides the lower mounting hole overlaps the PCB by a bit If you print it you could measure it, wouldnt have to be 1:1 either, plently of dimensions there Quote
studeb Posted December 10, 2010 Report Posted December 10, 2010 got up off my ass and did it my guess is 8.26mm to pin 3 2.32mm from the pcb top to the lower mounting hole and 9.80 from the lower hole to the middle of the 22mm cut out so 12.1mm from the PCB to the middle of the 22mm cutout how precise do you need it? Quote
deepak Posted December 19, 2010 Report Posted December 19, 2010 Canare L-4E6S/Belden 1694a/Mogami 2368 are they all about equal as far as RFI/EMI rejection goes? Quote
Emooze Posted December 20, 2010 Report Posted December 20, 2010 (edited) Looking for a latching, pushbutton power switch akin to a Bulgin vandal resistant switch that can handle 3A at 125VAC for a gainclone. Edited December 20, 2010 by Emooze Quote
luvdunhill Posted December 20, 2010 Report Posted December 20, 2010 Looking for a latching, pushbutton power switch akin to a Bulgin vandal resistant switch that can handle 3A at 125VAC for a gainclone. That's some gainclone. Perhaps the current on the primary in reality is a bit less? Quote
Emooze Posted December 20, 2010 Report Posted December 20, 2010 I have no idea what the actual current is and my meter is at school. Just went off of the fuse rating. Quote
luvdunhill Posted December 20, 2010 Report Posted December 20, 2010 I have no idea what the actual current is and my meter is at school. Just went off of the fuse rating. How did you come up with the fuse rating? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.