G600 Posted February 25, 2015 Report Posted February 25, 2015 Yep, sure. But maybe somebody has an unused set or some spares I can make disappear.
luvdunhill Posted February 25, 2015 Report Posted February 25, 2015 So by "help you source", you mean "sell to me". Gotcha.
luvdunhill Posted February 26, 2015 Report Posted February 26, 2015 I could have been more precise I have some. Asking $1000 each. 2
nikongod Posted February 26, 2015 Report Posted February 26, 2015 How much extra for matching? 25% matching free.
eggil Posted February 26, 2015 Report Posted February 26, 2015 Not bad for unobtanium. I would expect higher prices
luvdunhill Posted February 26, 2015 Report Posted February 26, 2015 Not bad for unobtanium. I would expect higher prices * matched at Iq=0, Tc=my cold grubby hands
spritzer Posted February 27, 2015 Author Report Posted February 27, 2015 I guess that is enough for a few T2's...
Pars Posted February 27, 2015 Report Posted February 27, 2015 Yeah, you might get a couple of good pairs outta that
Voltron Posted February 27, 2015 Report Posted February 27, 2015 When you need a break, Biggie, you have a new option in town: https://www.facebook.com/mikkeller/posts/984351641575848
spritzer Posted February 27, 2015 Author Report Posted February 27, 2015 That's pretty much on the same street as the bakery. 1
eggil Posted February 28, 2015 Report Posted February 28, 2015 (edited) No wonder those transistors are hard to get... Birgir bought them all! Edited February 28, 2015 by eggil
spritzer Posted February 28, 2015 Author Report Posted February 28, 2015 Well at least they are in good hands. I've spent a lot of money of on out of production sand in the last year though... a lot!!!
Earspeakers Posted March 21, 2015 Report Posted March 21, 2015 Anybody have a spare board set? Anybody thinking of running a new board set?
gepardcv Posted March 21, 2015 Report Posted March 21, 2015 I don't have a spare set, but I'm in if there's another group buy. Especially if they're as nice as the previous run. 4oz copper, wasn't it?
nopants Posted March 21, 2015 Report Posted March 21, 2015 new board run is like at least 500 usd, just a heads up
luvdunhill Posted March 21, 2015 Report Posted March 21, 2015 Perhaps Lil'Knight has some, alongside everyone's money.
Earspeakers Posted March 29, 2015 Report Posted March 29, 2015 I found a source for a board set thanks, ordered the silicon (DAMN THAT HURT BAD), Penny and Giles pot (already numb from the silicon), and transformers. All the major parts. KGST smoke test today, KGSSHV in a month, Megatron about 3 months out, T2 by end of year. 1
G600 Posted March 30, 2015 Report Posted March 30, 2015 (edited) Great and ambitious lineup ! I'm also stocking things for this beast, but being a slow builder it's going to take several months... I'm gathering mods ant tips in the thread for now. Edited March 30, 2015 by G600
Icarium Posted April 11, 2015 Report Posted April 11, 2015 Hrm any hot tips for good feet for the original kevin gilmore chassis?
kevin gilmore Posted April 11, 2015 Report Posted April 11, 2015 I used some small vintage feet. No idea of part number. Justin's rubber feet are probably way to big, besides which the hole size is too small.
particleman14 Posted April 13, 2015 Report Posted April 13, 2015 I see some people asking for boards. I have a set I might be willing to let go from an old GB run. pm me if you're interested.
Earspeakers Posted April 14, 2015 Report Posted April 14, 2015 (edited) I have a quote for 4 sets of PS and Amp boards, I need one, three (only) more participants and I'll do the run. Blue board 92 mil board thickness (thick but not too thick) 2 oz trace I got them to come down a bit on the cost, it's now $314/set + tax and shipping. On this one I'll eat some of the cost and joiners can get them for $300 + shipping to them. I've got quotes from other sources and they're coming in more expensive, such as $280/board. Edit: This rev of the board (known to work) Here's the AMP board http://instantdfm.bayareacircuits.com/dfmquote/txm5x3d9/results/ PM me if interested. I also have an unusual/rare board I can't use, it's for standard off the shelf 400mm heat sink, is .125 thick with gold mask, if anybody is interested ($240 shipped) Taken Edited April 18, 2015 by Earspeakers
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now