kevin gilmore Posted November 14, 2009 Report Posted November 14, 2009 So its going to end up cheaper than i thought. So sue me. Mostly its because the power supply board is not going to be full size and that is going to make things cheaper. So the amplifier board really is what i said above unless there is some other charge i don't know about.
Les_Garten Posted November 14, 2009 Report Posted November 14, 2009 So its going to end up cheaper than i thought. So sue me. Mostly its because the power supply board is not going to be full size and that is going to make things cheaper. So the amplifier board really is what i said above unless there is some other charge i don't know about. I'm sure there will be few opportunities to use the word "cheaper" in this project! Indulge yourself!
mrarroyo Posted November 14, 2009 Report Posted November 14, 2009 Darn, this is looking awesome! It is almost making me want an stax set up. But like many no money available.
jigster Posted November 24, 2009 Report Posted November 24, 2009 Woah... Just came across this thread, must have been blind all this while (though I did only just joined the Headcase community ). This project looks awesome! I'll would dearly love to get my hands on one of these monsters. Now I know where to put ALL my hard earned money.... This IS my wet dream!
kevin gilmore Posted November 25, 2009 Report Posted November 25, 2009 Well then, a couple of more pictures http://gilmore.chem.northwestern.edu/t2chassis14.jpg http://gilmore.chem.northwestern.edu/t2chassis15.jpg all thats left to do is the backpanel for the power supply, and to buy some shaft extenders (and pick a normal knob) (and pick which stax jack) glad i waited on the power supply board, as one of the mounting holes would have run into the front panel flange. amp boards should be here next week for those people just itching to start stuffing the boards. Angle brackets also available. Perfect for turkey day... I'm pretty much back on schedule.
luvdunhill Posted November 25, 2009 Report Posted November 25, 2009 excellent work! Also, looks like the wall wart on the far right will fit just fine! 1
Les_Garten Posted November 25, 2009 Report Posted November 25, 2009 excellent work! Also, looks like the wall wart on the far right will fit just fine! RadioShack Universal Wall Wart FTW!
kevin gilmore Posted November 25, 2009 Report Posted November 25, 2009 excellent work! Also, looks like the wall wart on the far right will fit just fine! Thats the battery charger for the nikon. Not going in the power supply box. No room!
Deadneddz Posted November 25, 2009 Report Posted November 25, 2009 This thing is going to kick major ass! Hard work well rewarded. Theres got to be a way to make this whole amp silver. At least for Spritzers sake. He did after all hunt down this unicorn in the first place.
spritzer Posted November 25, 2009 Author Report Posted November 25, 2009 Moar amps in moar silver makes me moar happy...
kevin gilmore Posted December 1, 2009 Report Posted December 1, 2009 http://gilmore.chem.northwestern.edu/t2chassis16.jpg http://gilmore.chem.northwestern.edu/t2chassis17.jpg http://gilmore.chem.northwestern.edu/t2chassis18.jpg http://gilmore.chem.northwestern.edu/t2chassis19.jpg The holes for the 2sc3381's came out very tight, but other than that, it looks real good
nattonrice Posted December 1, 2009 Report Posted December 1, 2009 Holy shite... here's to cnc milling! Looks to fit like a glove =)
Voltron Posted December 1, 2009 Report Posted December 1, 2009 Oh damn, that is awesome! Nice boards.
Kerry Posted December 3, 2009 Report Posted December 3, 2009 Looking absolutely awesome. I just noticed how many holes there are in them boards. That'll take more than a few nights to stuff I expect the results to be well worth it
kevin gilmore Posted December 3, 2009 Report Posted December 3, 2009 shipped power supply board this morning. parts stuffing starts possibly today. No later than saturday morning. fact is i'm sure i'm missing a few parts. I can stuff parts and solder the board in 4 hours! (I'm lying my ass off. )
spritzer Posted December 3, 2009 Author Report Posted December 3, 2009 4 hours maybe with all parts precut and bent into the correct shape.
nattonrice Posted December 3, 2009 Report Posted December 3, 2009 Excellent timing! I just got a quote from Richard for the iron for this and a b24. The shipping is crazy cheap for the weight.
spritzer Posted December 3, 2009 Author Report Posted December 3, 2009 Good to know since I have quite a few transformers to order...
nattonrice Posted December 3, 2009 Report Posted December 3, 2009 I was worried as the beta24 one is like the plitron that Ti used but with everything I need on it instead of a separate supplementary toroid... heavy =S
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now