JH Audio stuffs

[The Monkey]

I used them to listen to a movie that was shown on the bus last night and they were great.

[Wmcmanus]

I used them to listen to a movie that was shown on the bus last night and they were great.

What were you doing on the funny bus?

[The Monkey]

[Dusty Chalk]

Monkey: you do realize that in addition to digitally replacing the entire crossover, the JH3A also can be used to EQ things like a slightly hot top end.

[The Monkey]

Monkey: you do realize that in addition to digitally replacing the entire crossover, the JH3A also can be used to EQ things like a slightly hot top end.

It has occurred to me more than once.

[Augsburger]

dew et............

[forbigger]

dinny, watch out plugging your JH to the in seat entertainment. I created a thread somewhere here on how in seat entertainment on one of airline fried my TF10......dont want your 1k investment got fried needlessly

[recstar24]

Any updates regarding the jh3a from the early adopters?

[blessingx]

Not yet. I called on a cord the other day and asked if they could give even a general, but more specific, date on the 3As and was told 'no.'

[Spychedelic Whale]

After listening more time with the jh16 my impressions changed for better, I think I was still used to the grado sound and the jh16 wasn't so forward to wow me but with time I got used to the signature which I believe is the perfect sig for my ears , perfectly balanced not so much forwardness/brightness but still engaging and sibilance which made me go crazy is practically gone. And I started listening those amazing tiny detailed vibrations and the bass is something else I LOVE it.

As for the fit I found the left piece to be to chunky and uncomfortable, it barely twists.. I tried the sensasonic seal test and even with more isolation from the left the tones were lower and vibrations didn't extend as much. Although the right piece is perfect.

I will send it again and lets hope it will be the last one, I can't wait to listen to them without worrying to much with fit and from a decent source different than my handicap mp3 player. I'm seriously thinking selling my dac, ordered amp and go for the JH3A Nooo...

[elnero]

Ordered a Null Audio Enyo JH cable today. I hope it doesn't suck.

Did you ever get the Enyo?

[luvdunhill]

Did you ever get the Enyo?

yes! can't wait to chop off that piece of shit viablue connector

no communication what so ever from Null Audio, both about a custom length (pre-sale) and complaining that it didn't have the connector I specifically ordered (post-sale)...

[guzziguy]

At least their name is honest.

[Les_Garten]

At least their name is honest.

Kinda like the ZERO DAC, ehhh?

[elnero]

yes! can't wait to chop off that piece of shit viablue connector

no communication what so ever from Null Audio, both about a custom length (pre-sale) and complaining that it didn't have the connector I specifically ordered (post-sale)...

Sorry to hear the communication sucks, I've heard mixed reviews about that aspect of the company. The cable I have was bought second hand with my Triple.Fi's so I've never had to deal with them.

Did you have any problems with the pins fitting? I tried my Null Audio cable on the 13Pro's but the pins were far too loose to make a good connection and I didn't want to chance bending them and ruining their use on the Triple.Fi's which I still use for back up and lawn work. Also, how flexible is the Null? I ask because mine's an older prototype and is a bit stiff and unwieldy, it's almost like the braid is a bit too tight. What I do like about my Null cable though is the plastic tubes around the memory wire, the JH Audio stock cable squeaks quite a bit when it rubs against my glasses but I've never had that problem with the Null on my Triple.Fi's which is why I'm kind of interested in trying the Null on the 13's.

[crappyjones123]

did any of the florida crew get impressions done down here?

i could either wait until thanksgiving (thats the only weekend i see myself having any time this semester) and drive up to jhaudio and get impressions done directly by them (3 hours drive each way) or get them done down here right now. instant gratification vs getting them done by the guys making the damn thing but possibly getting stuck in the thx giving back order. last year they had a nice little discount that essentially balanced out the stupid sales tax i will have to pay for having a fl credit card.

also, does it make a difference to get impressions done by the jhaudio people? any ideas on how many people had to send for refits among the people that had the impressions done by jhaudio themselves?

[boomana]

I had my impressions for UE11 done in Ft. Lauderdale, and they were very close to being perfect, though needed a couple tweaks before just right. I would recommend her. I don't remember who it was, but it was a woman I got off the UE site.

[cetoole]

I had my impressions done directly by the JH people at canjam this year, and they are a bit loose, so I would really just look for someone who seems good in your area to handle things.

[crappyjones123]

Maria D. Rosa, H.I.S.

2310 East Oakland Park Boulevard

Fort Lauderdale, FL 33306

United States

was that her vicki? if so im never going back to that office. back in high school, i had some severe ear ache the day before my ap computer science exam. went to her dad (who practices with her) and he first left me with crap in my ear for ~20 minutes to take a personal phone call, which is fine. emergencies come up. then he proceeded to ask her to take over for him. she ended up tearing my ear drum and then ran out yelling for the doctor to come back. doctor then immediately made my mom sign a paper saying that he had no malpractice insurance and that he was not liable for any injuries. obviously at the time she was not completely in her wits. from that point on, refused future care and referred us to another doctor.

[boomana]

That was her. Glad my experience with her was different than yours.

[Dusty Chalk]

...she ended up tearing my ear drum...

Jesus.

[crappyjones123]

vicki, which do you prefer between the two? 13 vs 16. iirc, my hearing preferences closely conformed to yours.

[boomana]

I've never heard the 16s, except with the 3A, and they were demos. I think the 13s with the pico slim are perfect for me. If reports that the 16s have even a bit more bass, I'm not interested.

[Les_Garten]

I had Avery sound do my custom earpiece for my Bluetooth Headset and I did the mold myself and sent it to them. Not exactly Rocket Science here. I've had custom molds made since the late eighties, never with any not working correctly, still have them. Not sure why all the re-do's here. I'm close enough to JH to have them done there when I pull the pin on that idea.

[GPH]

The guy I went to for my JH13 molds was very experienced with musicians, IMO that's an important prerequisite. If the person had looked at me with a wtf face when I told I wanted molds for custom earphones, I would have gone elsewhere.