faust3d Posted May 26, 2009 Report Posted May 26, 2009 Seeking some advice here. I traded some of my stuff for Symphonic line RG2 Preamp. It's in OK condition and sounds good, but shiny steel front plate and body are covered in patina. What can I use to clean it to restore to it's shinny condition. It should look like this: It's also missing two screws from the back plate that hold two RCA jacks to the back panel. Do you guys now a good store to order various crews. These amps are made in Germany so all the screws are hex. Quote
faust3d Posted May 26, 2009 Author Report Posted May 26, 2009 I did, does not seem to work. I also tried some stuff that should clean stainless steel appliances, zero effect. Quote
faust3d Posted May 26, 2009 Author Report Posted May 26, 2009 Do I have to keep the vinegar on it overnight or for several hours? I dipped some cloth in it and rubbed, nothing happened. Quote
Augsburger Posted May 26, 2009 Report Posted May 26, 2009 Try lemon juice, even though they are both acids, I sometimes have had better results with pure lemon juice. Quote
faust3d Posted May 28, 2009 Author Report Posted May 28, 2009 I tried lemon juice and some other stuff and it seem that this patina is very stubborn. I might have to send the pre to Klaus at Odyssey Audio (he is the US distributor he he) to give it a check-up and tune-up as well as some shining treatment. I really like how it sounds so far. Quote
deepak Posted May 28, 2009 Report Posted May 28, 2009 I would post this in the Steve Hoffman forums. There are a few people there that restore hifi equipment that might have some more tips. Quote
guzziguy Posted May 28, 2009 Report Posted May 28, 2009 Or just explain the situation to Klaus and ask him for suggestions. Quote
Grand Enigma Posted May 28, 2009 Report Posted May 28, 2009 Or just live with the character the pre has gained over the years Quote
Dusty Chalk Posted May 28, 2009 Report Posted May 28, 2009 Or get someone with woodworking skills to make a new case for it. Quote
faust3d Posted May 28, 2009 Author Report Posted May 28, 2009 Heh, the case is nice and the front panel is very nice 10mm steel. I don't mind it looking like this, but I am still thinking about getting it checked out by Klaus. This is the unit that Tempest is based on by the way. Quote
veloaudio Posted June 2, 2009 Report Posted June 2, 2009 Post a picture. Some patina might not look too bad. If you do want to polish, you might seek out some car collectors as they might have a better suggestion; 3M chrome polish, etc. On a side note when I saw the word patina in the subject it took me back... I didn't polish this patina out though. Quote
faust3d Posted June 2, 2009 Author Report Posted June 2, 2009 Well I polished it some more with some concentrated lemon juice and it worked a bit: Quote
faust3d Posted June 18, 2009 Author Report Posted June 18, 2009 So I looked around and found that Maas metal polish works great on this kind of stuff. I went to Home Depot and picked up some Maas and microfiber cloth and now my pre looks like this: Knobs are still a bit dirty, I need to remove them and clean them up, but I am too lazy for this kind of major work. Quote
Dusty Chalk Posted June 18, 2009 Report Posted June 18, 2009 Sweet. Thanks for the info, I'm-a gonna have to do the same thing with my Manley Stingray, looks like. Quote
faust3d Posted June 18, 2009 Author Report Posted June 18, 2009 did the polish remove the lettering? the lettering looks engraved, but it's hard to tell for sure... The lettering is engraved and it's there, the engraving it deep but because the pre is so shinny it's hard to see from some angles. I can take another picture straight on so that you can see how it looks. Maas polish is very gentle and non abrasive so it did not remove anything but patina, it did not even remove a few fine scratches that were there. I know there is different product that can be used to buff the fine scratches, but I don't mind them so I don't think I will be using it. Quote
Pars Posted June 18, 2009 Report Posted June 18, 2009 I seem to recall using the Maas before, but my favorite is Simichrome. I've used that for years on my Campy bike parts, etc. Kind of hard to find in the US these days though (German product, Happich IIRC is the company that makes it). Quote
faust3d Posted June 18, 2009 Author Report Posted June 18, 2009 Yeah, engraved, just like them fancy Grado metal cups. Take a look at the original patina covered pic. Just for the heck of it I will try to take a pic today with all lettering visible, not going to be easy. Quote
Dusty Chalk Posted June 18, 2009 Report Posted June 18, 2009 Yeah, it appears to be completely gone in the new pic. Quote
faust3d Posted June 19, 2009 Author Report Posted June 19, 2009 After some careful camera angling I was able to get the labels to show up very nicely: You can also see one of the bigger scratches next to monitor knob. Quote
wualta Posted June 19, 2009 Report Posted June 19, 2009 Dang, that's shiny. A pre that makes it necessary to have good furniture. Quote
faust3d Posted June 19, 2009 Author Report Posted June 19, 2009 Yeah, and makes it difficult to take pictures so the owner is not reflected in his underwear Quote
Dusty Chalk Posted June 19, 2009 Report Posted June 19, 2009 Hey, wow, now you're completely gone. That's some pretty fancy camerawork. Quote
hirsch Posted June 19, 2009 Report Posted June 19, 2009 I seem to recall using the Maas before, but my favorite is Simichrome. I've used that for years on my Campy bike parts, etc. Kind of hard to find in the US these days though (German product, Happich IIRC is the company that makes it). Simichrome is a staple for pen restoration. Great polish. If you don't have a local place that carries it, you can get it at Pendemonium - Fountain Pens, Pencils, Inkwells, Stationery, and other Writing Equipment for Fountain Pen Enthusiasts (look under "repair supplies") and other places that might carry pen or jewelry repair supplies. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.