n_maher Posted October 17, 2007 Report Posted October 17, 2007 hehe, international business dealings! Yeah, but their chassis kick the f'ing bag out of stuff this side of the pond. I'm not sure I can afford to deal with them yet, unfortunately. Need to do some serious mock up and see how things might fit.
Nanoha Posted October 17, 2007 Report Posted October 17, 2007 Yeah, but their chassis kick the f'ing bag out of stuff this side of the pond. I'm not sure I can afford to deal with them yet, unfortunately. Need to do some serious mock up and see how things might fit. Oh snap. Isn't that hexateq? The company that makes AMAZINGLY beautiful and expensive cases? They look soooo darn nice. I remember their prices were omgwtfbbq. But I think they're still worth it if you have the money.
Nanoha Posted October 17, 2007 Report Posted October 17, 2007 ~$400 + shipping? Hmm.... Oh my goodness; the switch, posts, jacks, and power jack all look fabulous as well. Their custom labeling also looks sweet! http://www.hexateq-av.com/enclosure_configuration.html
n_maher Posted October 18, 2007 Report Posted October 18, 2007 ~$400 + shipping? Hmm.... Oh my goodness; the switch, posts, jacks, and power jack all look fabulous as well. Their custom labeling also looks sweet! http://www.hexateq-av.com/enclosure_configuration.html Like I said, not sure I can swing it yet. But if it's between that and using 2 par metals chassis I'm sorry, this is probably one of the last amps that I'll build for myself. It's going to look the business.
n_maher Posted October 18, 2007 Report Posted October 18, 2007 Looks like a Mac Mini... cool. Except it's ~18" wide and 4"+ tall, a bit larger than a mac mini.
philodox Posted October 18, 2007 Report Posted October 18, 2007 Just a bit. Sounds like your beta22 is gonna be purdy!
n_maher Posted October 18, 2007 Report Posted October 18, 2007 Just a bit. Sounds like your beta22 is gonna be purdy! Assuming it doesn't bankrupt me, quite possibly. I actually want to use this version with the extended legs.
n_maher Posted October 18, 2007 Report Posted October 18, 2007 nice.... now get back to work About to put on some Reaper and strip your cable wise-guy, don't push me or I'll go MOT on your ass and start charging you.
DigiPete Posted October 18, 2007 Report Posted October 18, 2007 About to put on some Reaper and strip your cable wise-guy, don't push me or I'll go MOT on your ass and start charging you. just joking
n_maher Posted October 18, 2007 Report Posted October 18, 2007 just joking Better be since the cable is done.
Nanoha Posted October 18, 2007 Report Posted October 18, 2007 Like I said, not sure I can swing it yet. But if it's between that and using 2 par metals chassis I'm sorry, this is probably one of the last amps that I'll build for myself. It's going to look the business. Haha yeah.
JBLoudG20 Posted October 18, 2007 Report Posted October 18, 2007 Better be since the cable is done. MOTMOTMOTMOTMOTMOTMOTMOTMOTMOT
n_maher Posted October 18, 2007 Report Posted October 18, 2007 MOTMOTMOTMOTMOTMOTMOTMOTMOTMOT Based on what I charged him, no. How are those pink headphones coming?
JBLoudG20 Posted October 18, 2007 Report Posted October 18, 2007 Based on what I charged him, no. You know I'm busting balls. How are those pink headphones coming? Parts have been paid for... now awaiting for arrival, and I still have to order the cable parts.
n_maher Posted October 18, 2007 Report Posted October 18, 2007 You know I'm busting balls. I do, just playing the part of the indignant DIY'er. Parts have been paid for... now awaiting for arrival, and I still have to order the cable parts. Anything I can help with, I've got a bit of a stock pile of sleeving and shrink, assuming you're ok with basic black.
JBLoudG20 Posted October 18, 2007 Report Posted October 18, 2007 I do, just playing the part of the indignant DIY'er. Anything I can help with, I've got a bit of a stock pile of sleeving and shrink, assuming you're ok with basic black. Thanks for the offer.. the cable will be just your run of the mill mini mogami -> neutrik 1/4" I think I can handle $15 in parts UNLESS... you have nylon multi filament sleeving.. then maybe we can tlak turkey because it would save me (expensive) shipping from another vendor.
n_maher Posted October 18, 2007 Report Posted October 18, 2007 Thanks for the offer.. the cable will be just your run of the mill mini mogami -> neutrik 1/4" I think I can handle $15 in parts UNLESS... you have nylon multi filament sleeving.. then maybe we can tlak turkey because it would save me (expensive) shipping from another vendor. Only a couple hundred feet of it. I've got 1/8, 3/16 and 1/4 I think. The cable that I did for DigiPete last night was to strip the jacket and shield off of 2534, run it through 3/16" multifilament and leave a bit exposed at each end so he can terminate it and rewire some cans with it. Ends up being a nice, flexible headphone cable. I'm going to try doing a similar trick with mini-mogami and 1/8 MF, should be a [cartman]sweeeeeet![/cartman]
JBLoudG20 Posted October 18, 2007 Report Posted October 18, 2007 Only a couple hundred feet of it. I've got 1/8, 3/16 and 1/4 I think. The cable that I did for DigiPete last night was to strip the jacket and shield off of 2534, run it through 3/16" multifilament and leave a bit exposed at each end so he can terminate it and rewire some cans with it. Ends up being a nice, flexible headphone cable. I'm going to try doing a similar trick with mini-mogami and 1/8 MF, should be a [cartman]sweeeeeet![/cartman] That is pretty much the plan for my cable. Does the 1/8" fit the best?
n_maher Posted October 18, 2007 Report Posted October 18, 2007 That is pretty much the plan for my cable. Does the 1/8" fit the best? Haven't tried 1/8 on mini Mogami yet, but 1/8" doesn't fit over standard 2534 Mogami well at all. Someone with infinite patience might be able to do it but that isn't me and the 3/16" was able to tighten down onto the cable nicely. Or at least Pete like the sample that I sent him enough to convince me to do a 10' run of it. If you want 10' or so of the 1/8" just shoot me a PM.
aerius Posted October 18, 2007 Report Posted October 18, 2007 UNLESS... you have nylon multi filament sleeving.. then maybe we can tlak turkey because it would save me (expensive) shipping from another vendor. There's this thing called a shoelace, available for a buck at the dollar store. The ones for athletic shoes and hockey skates are hollow inside so you can thread a cable right through them as seen on this page.
Dusty Chalk Posted October 19, 2007 Report Posted October 19, 2007 So literally, cables on a shoestring budget.
DigiPete Posted October 19, 2007 Report Posted October 19, 2007 Haven't tried 1/8 on mini Mogami yet, but 1/8" doesn't fit over standard 2534 Mogami well at all. Someone with infinite patience might be able to do it but that isn't me and the 3/16" was able to tighten down onto the cable nicely. Or at least Pete liked the sample that I sent him enough to convince me to do a 10' run of it. If you want 10' or so of the 1/8" just shoot me a PM. schweeeeeeet
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now