Voltron Posted January 13 Report Posted January 13 (edited) My friend and former secretary has asked me -- and now Steve -- to build some cabinets for a pantry area next to the kitchen at her new house. That project will take a while to percolate but I decided to build here a kitchen island in the meantime to replace a table she has been using to expand her counter space. Her cabinets have a dark cherry stain so at first I was going to go paint grade to avoid clashing. Rooting around the shop, however, I found enough figured maple boards for the main pieces and thought that would fit well so I went for it. I had to buy the prefab butcher block top and maple 1x3s for the slats below, but all the other maple and one plywood for the drawers and cabinet bottom were in the shop. It's hard to tell from the photos but the figuring on the cabinet and drawer fronts is really pretty. She wanted a knife drawer and another for large cooking utensils, so that's what she got. The knife blocks are maple with non tarnishing felt. Very happy with the results, except that I don't love the coloring of the butcher block. Terri loves it but may not be able to use it fully until she can get over the idea of marring it. 😂 Edited January 13 by Voltron 15 Quote
swt61 Posted January 13 Author Report Posted January 13 The pics don't do justice to the incredible flame Maple front section. And the homemade fried chicken, macaroni and cornbread she made us were amazing! 5 Quote
Iron_Dreamer Posted January 13 Report Posted January 13 Looks amazing guys, and she looks so happy with it! 1 1 Quote
swt61 Posted January 14 Author Report Posted January 14 Nope, just guy. This was a solo effort by Voltron alone. I just helped deliver it. The pebble is no longer in my hand. 6 Quote
blessingx Posted January 14 Report Posted January 14 2 hours ago, swt61 said: Nope, just guy. This was a solo effort by Voltron alone. I’m sure the cabinets will be beautiful too. Quote
luvdunhill Posted January 24 Report Posted January 24 Who said you can’t use speaker stands as saw horses? Quote
swt61 Posted January 24 Author Report Posted January 24 I think the real question is, can you use sawhorses as speaker stands? 1 Quote
Grahame Posted January 24 Report Posted January 24 5 minutes ago, swt61 said: I think the real question is, can you use sawhorses as speaker stands? (to "re-purpose" a "similar" internet meme) 1 1 Quote
naamanf Posted January 30 Report Posted January 30 Awesome work, Al! I’ve been pretty busy tearing apart a building, but I did manage to get these non-woodworking signs built for a local company. 5 1 Quote
Voltron Posted January 30 Report Posted January 30 Those are cool! Did you make them on the magic ping pong table? Quote
naamanf Posted January 30 Report Posted January 30 9 minutes ago, Voltron said: Those are cool! Did you make them on the magic ping pong table? No, magic 50Kwatt fiber laser table and magic 200w CO2 laser table. 3 Quote
n_maher Posted January 31 Report Posted January 31 On 1/29/2025 at 9:22 PM, naamanf said: No, magic 50Kwatt fiber laser table and magic 200w CO2 laser table. Dayom. Quote
swt61 Posted February 9 Author Report Posted February 9 I've been thinking about teaching myself to carve wood. Yesterday I decided to give it a go on an old cabinet. I do tend to get over ambitious. Did I go overboard? 2 6 1 Quote
Dusty Chalk Posted February 12 Report Posted February 12 Saw this, made me think of you people: That speaker placement at the end, though. (cringe) 4 Quote
VPI Posted February 13 Report Posted February 13 On 1/29/2025 at 8:22 PM, naamanf said: No, magic 50Kwatt fiber laser table and magic 200w CO2 laser table. What CO2 did you get? Quote
naamanf Posted February 13 Report Posted February 13 4 minutes ago, VPI said: What CO2 did you get? I had the local plastic shop do it for me. No C02 yet, unless my foray into building one off signs takes off. Quote
VPI Posted February 13 Report Posted February 13 From what I can tell, to be successful in the sign making business, you should be showing off your sign, standing next to it in yoga pants with your butt taking up at least a 3rd of the shot. All the big names in the business use this model. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.