tommylck Posted June 17, 2019 Report Posted June 17, 2019 On 3/14/2019 at 10:04 PM, mwl168 said: JoaMat's mini T2 Please add me if possible 2x GRHVxxx1x GRLV79xx1x GRLV78xx1x Main Board1x miniT2 Thanks
mwl168 Posted July 8, 2019 Author Report Posted July 8, 2019 (edited) I owe everyone a long past-due update. Long story short, I injured my right hand in early April right around the time we set out to test the final boards before sending the Gerber files for estimates. Actually got parts ordered and delivered but I was way too optimistic with the recovery schedule of my hand and I am finally to the point I think I can handle a soldering iron. I am back in touch with Kerry to sort out a few things needed for testing. Apologize for the lack of communication for weeks. Hopefully we will be back on track with the GB soon! Edited July 8, 2019 by mwl168 4
jose Posted July 8, 2019 Report Posted July 8, 2019 Do not worry Michael. The important thing is that you are well.
Laowei Posted July 8, 2019 Report Posted July 8, 2019 Taking the time to get well is the #1 priority. All else is just a DIY hobby. Don't push it. Get your health back first.
sbelyo Posted July 9, 2019 Report Posted July 9, 2019 8 hours ago, mwl168 said: I owe everyone a long past-due update. Long story short, I injured my right hand in early April right around the time we set out to test the final boards before sending the Gerber files for estimates. Actually got parts ordered and delivered but I was way too optimistic with the recovery schedule of my hand and I am finally to the point I think I can handle a soldering iron. I am back in touch with Kerry to sort out a few things needed for testing. Apologize for the lack of communication for weeks. Hopefully we will be back on track with the GB soon! Get well bro... I know all about underestimating recovery time tables. I had major ankle surgery in February and I'm still on crutches lol
Whitigir Posted July 9, 2019 Report Posted July 9, 2019 Michael, please be well. That is the most important
Skooby Posted July 9, 2019 Report Posted July 9, 2019 Take care of yourself first! This is just a hobby, no rush. Wish for your quick and complete recovering!
mwl168 Posted July 9, 2019 Author Report Posted July 9, 2019 Thanks guys for your kind words. I hope to have better news soon!
Pars Posted July 10, 2019 Report Posted July 10, 2019 Yes, get well Michael! You'll get back to it sooner or later, and no one expects you to do the prototyping until you feel up to it.
johnwmclean Posted July 10, 2019 Report Posted July 10, 2019 But Michael you have two hands... use the other one!!! ... best of luck getting 100% better! 1
mwl168 Posted July 11, 2019 Author Report Posted July 11, 2019 I reserve my left hand for some very special purposes, hehe! Table updated! 1
mwl168 Posted July 28, 2019 Author Report Posted July 28, 2019 (edited) Quick update of status; Some changes are needed for the GR78xx and GR79xx boards. Working with Kerry to get new boards fabricated for testing. Good news is, with the delay, a couple of parts that were out of stock everywhere in April are now back in stock so we don't have to settle with substitution parts for testing. Edited July 28, 2019 by mwl168 1
jamesmking Posted September 30, 2019 Report Posted September 30, 2019 Depending upon the price, I would be interested in 2x GRLV78xx and 2x GRLV79xx Thank you.
Kerry Posted October 1, 2019 Report Posted October 1, 2019 (edited) Just finished designing the GRHV79xxx, which is the negative rail. I'm going to order some boards and test it out as well. Maybe add this to the group buy if it works On the testing front I'm done test the GRHV78xxx. I've made one small change to the board and will test that as well, but looks good. The GR78xx-Micro looks good and will test the GR79xx-Micro shortly. Michael is making some progress as well and I hope we can get this moving sooner rather than later PS I'm happy using the 7V reference. It requires less current which reduces heat and works well. Edited October 1, 2019 by Kerry 8
mumford Posted October 2, 2019 Report Posted October 2, 2019 (edited) Please add me for 1 set of mini T2(2,1,1,1,1) Edited October 2, 2019 by mumford x
mwl168 Posted October 2, 2019 Author Report Posted October 2, 2019 Quantity of 1 for the mini T2 represents a pair of left and right channel boards.
mumford Posted October 2, 2019 Report Posted October 2, 2019 5 minutes ago, mwl168 said: Quantity of 1 for the mini T2 represents a pair of left and right channel boards. Thanks. I edited my request above.
Kerry Posted October 15, 2019 Report Posted October 15, 2019 Just got a few boards in. From left to right... GRHV78xxx, GRHV79xxx and to the right is a new experimental digital alternator. It’s stackable for balanced 11
G600 Posted October 15, 2019 Report Posted October 15, 2019 (edited) Briliant! Damn excited by the perspective of those miniature HV supplies. You are never short of wonders Kerry, are you? One day I'll have to study those relay attenuators. The coding (which you provided) and Arduino thing have always seemed too complicated for me ? Edited October 15, 2019 by G600 1
lkong Posted October 15, 2019 Report Posted October 15, 2019 (edited) Is it too late? Please sign me up for: 2x GRHVxxx1x GRLV79xx1x GRLV78xx1x Main Board 1x miniT2 Edited October 15, 2019 by lkong
jose Posted October 16, 2019 Report Posted October 16, 2019 They look very good Kerry!!!. What size SMD are you using? it looks relatively small. The same thing happens to me with the "digital" theme. I see it too complicated and I need a lot of help (more than usual) 1
Kerry Posted October 16, 2019 Report Posted October 16, 2019 The resistors on the digital attenuator are 1206. For the HV supplies the resistors are a mix of 1206 and 0805.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now