steefdebruijn Posted May 31, 2017 Report Posted May 31, 2017 With these quotes and potential problems it is almost more beneficial to just get the Antek trafos and ship them to the Netherlands for the premium price. No fancy box to put on top of the case though... (and no 13/14VAC ones, just 15VAC so more heatsinking for the LV supply) Quote
jose Posted June 1, 2017 Report Posted June 1, 2017 I'm waiting for two new trafos from Toroidy. If I have problems with it again probably I will try other manufacturers Enviado desde mi SM-G920F mediante Tapatalk Quote
steefdebruijn Posted June 1, 2017 Report Posted June 1, 2017 I am very curious about your findings. Thanks in advance for any feedback on this. Quote
mwl168 Posted June 2, 2017 Author Report Posted June 2, 2017 All packages with US shipping address have been posted to USPS Priority Mail. Please PayPal me $7.2 US for the postage. Overseas packages will be posted next week. I'll PM each with the postage as it will be based on destination and weight. Quote
gepardcv Posted June 5, 2017 Report Posted June 5, 2017 Boards came in today. They look great. Thanks again for the GB! Quote
mwl168 Posted June 6, 2017 Author Report Posted June 6, 2017 All international-destined packages have been sent too. I'll PM each with the postage. Happy building! 3 Quote
jose Posted June 9, 2017 Report Posted June 9, 2017 On 01/06/2017 at 8:42 AM, steefdebruijn said: I am very curious about your findings. Thanks in advance for any feedback on this. Measures (no load): AUDIO GRADE TSA300VA PRI:230V SEC: > 2x360V & 350mA 386volt/386volt > 18-0-18V & 600mA 18,63volt/18,63Volt AUDIO GRADE TSA60VA PRI:230V SEC: > 2x 6,3V & 4,5A 6.83volt/6,83volt No noises or hum . The measures are... more or less but I'm worrying for HV (a difference of 26volt) Quote
UFN Posted June 10, 2017 Report Posted June 10, 2017 The difference in voltage is only app. 7%. If you look at other transformer specs you'll see that this is perfectly normal for a 300VA toroidal, so it should be absolutely nothing to worry about //UFN Quote
steefdebruijn Posted June 10, 2017 Report Posted June 10, 2017 Thanks for the follow up. Toroidy still a candidate then. Should I run for 13, 14 or 15 VAC secondaries for 12VDC regulated? Quote
eggil Posted June 11, 2017 Report Posted June 11, 2017 Got my boards today. Thank You! I have posted pics before but here are some more of my build. I noticed these boards have a 12 V for the filaments. The old board did not have it. 8 Quote
steefdebruijn Posted June 11, 2017 Report Posted June 11, 2017 Found another trafo manufacturer in Belgium (just around the corner so no excessive shipping fees I presume): http://www.monolithmagnetics.com/ asked a quote for one HV/LV and two filament trafos. Quote
gwrskien Posted June 14, 2017 Report Posted June 14, 2017 Package received here as well! Thank`s! Quote
jose Posted June 23, 2017 Report Posted June 23, 2017 Got my Pcb's!!!! Thanks Michael Enviado desde mi SM-G920F mediante Tapatalk Quote
bluebyte60 Posted May 24, 2018 Report Posted May 24, 2018 This is probably a long shot, does anyone has additional megatron pcb to spare. I am very interested. Thank you. Quote
mwl168 Posted May 27, 2018 Author Report Posted May 27, 2018 On 5/23/2018 at 9:22 PM, bluebyte60 said: This is probably a long shot, does anyone has additional megatron pcb to spare. I am very interested. Thank you. PM me if you are still interested. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.