silver plated copper wire from navships

[sbelyo]

Hasy anyone used the silver plated copper wire from navships on ebay?  I just picked up 10 ft of shielded 3 conductor 24 AWG stranded SPC.  I'm going to use it as hookup wire and maybe balanced interconnects.  Has anyone had any experiences with it?

[Pars]

A lot of people use navships wire in their projects, though I haven't used the particular one you have. I use 24ga hookup wire from navships, as well as 18 or 20ga for power. Teflon jacketed (big plus).

[sbelyo]

I got tired of stripping the jacket and shield off of the canare star quad stuff.  I wasn't about to pay $6 - $8 a foot for silver hook up wire.  I'll save that stuff for after everything is built and the wiring is the last thing to tweak

[UFN]

I have accumulated quite a lot of that stuff and I'm generally very happy. The only minor annoyance is that it's mostly surplus stuff, so getting consistent colors can be a problem. No problem with the quality though - and yes, once you get used to teflon jacketed it's very hard to go back 

 

//UFN

[Craig Sawyers]

I wired my T2, and made the umbilicals using teflon coated wire from Navships - and that is a good number of years ago. So the colours are different - not a problem provided you have enough colours to be unambiguous when wiring up.

[sbelyo]

cool, I think I'll switch to their stuff

 

[G600]

It's my only source of wire.

Teflon is not easy to strip, but that's not the point.

[sbelyo]

I think pars says the ideal strippers work.  I'm pretty sure I've seen them at my home depot

 

[Pars]

just watch the gauge... not sure Home Depot carries the ones that do up to 30ga.

[GeorgeP]

I prefer buying Belden spc Teflon coated hook-up wire. It's roughly the same cost (but you have to buy 50 or 100ft lengths), and it is properly labeled and you can check the specs, whereas with the resellers and surplus sellers, it's difficult/impossible to verify. That said, I have only had good experiences with navships and bulkwire.com.

[Skooby]

I usually search on eBay for MIL-16878 for silver plated wires (same stuffs navships sells).  Some sellers sell bulk rolls (500ft-1000ft) at steep discount prices.  There are spec sheets for MIL-16878 wires somewhere on the web.  There are listed voltage ratings which handy as a reference for HV hookups.  I use this stripper for teflon, works fine even for 16 awg:

https://www.amazon.com/gp/product/B000IBOP70/    

[muskyhuntr]

I have also been using Navships wore for a number of years and I have been very happy with it.  Also, his Ebay reputation is stellar.

Me

[UFN]

I bought some precision wire strippers from Engineer on my last trip to Japan. Not really cheap, but excellent quality and they have no problems with teflon-coated wire. 

FWIW everything I can recall actually handling from Engineer has felt like it is excellent quality.

//UFN

[sbelyo]

Those look nice...  I like that they have a model that goes down to 34 awg stranded.  I just added them to my amazon list.  Looks like they're $28

I picked up the Ideal 45-120 and 45-125 off Amazon prime.  They were the cheapest.  They should be here by Friday.  We'll see how they work

[Pars]

The Engineer PA-05 with the crimper looks nice as well. The Ideal strippers that I have are plenty good but these look better. For the price they better be [emoji4]

 

 

Sent from my iPhone using Tapatalk

 

[UFN]

Let us know what you think when you get them then 

//UFN

[mwl168]

As an alternative, I've been getting my wires for high-voltage use here: http://www.apexjr.com/wire.html 

Unless my calculation is off, the cost is no higher than the navships offerings on eBay.