lkong Posted July 3, 2015 Report Share Posted July 3, 2015 spreadsheet was fixed, changed my v3 board number from 3 to 2. Quote Link to comment Share on other sites More sharing options...
DonnyHiFi Posted July 3, 2015 Report Share Posted July 3, 2015 My request looks fine on the spreadsheet, thanks mwl168 Quote Link to comment Share on other sites More sharing options...
b0bb Posted July 3, 2015 Report Share Posted July 3, 2015 Heres and online copy of the latest overview from MWL168; I hope I got everyone right (please check) https://docs.google.com/spreadsheets/d/1GWDWwLfsIDtwn1HB-x76lS6WyWwLd5lwsORFKiUuuEQ/edit?usp=sharing If someone whats to participate please add your alias by first adding a blank line above the "END" (I guess the SUM will continue to work that way). /S Thanks for doing this. My entry looks correct. Quote Link to comment Share on other sites More sharing options...
mwl168 Posted July 3, 2015 Author Report Share Posted July 3, 2015 Heres and online copy of the latest overview from MWL168; I hope I got everyone right (please check)https://docs.google.com/spreadsheets/d/1GWDWwLfsIDtwn1HB-x76lS6WyWwLd5lwsORFKiUuuEQ/edit?usp=sharing If someone whats to participate please add your alias by first adding a blank line above the "END" (I guess the SUM will continue to work that way). /S Many thanks to sorenb for doing this. I have not found time to figure out how it works. It's a great help. Quote Link to comment Share on other sites More sharing options...
sorenb Posted July 3, 2015 Report Share Posted July 3, 2015 @mel168: happy to help out! Can everybody put a date at the right most column to give mwl168 a chance to see when someone has checked their numbers? Quote Link to comment Share on other sites More sharing options...
Kerry Posted July 3, 2015 Report Share Posted July 3, 2015 (edited) its an ultra quiet and extremely stable power supply. the on board version is suitable for just about anything however, does not care. kind of overkill for kgsshv etc but there still is nothing better. how many are interested in this? http://gilmore.chem.northwestern.edu/kgsshvcarboncirclotron.jpg Gimli: Certainty of death, *small* chance of success... What are we waiting for? I'm in Edited July 3, 2015 by Kerry Quote Link to comment Share on other sites More sharing options...
sorenb Posted July 3, 2015 Report Share Posted July 3, 2015 I dont know about other GBs, but this one seems huge ... And would require a lot from mwl168 ...repacking and stuff....how about the GB pays for dr gilmores and mwl168 pcbs and call it a day? 1 Quote Link to comment Share on other sites More sharing options...
kingofsnake Posted July 3, 2015 Report Share Posted July 3, 2015 I dont know about other GBs, but this one seems huge ... And would require a lot from mwl168 ...repacking and stuff....how about the GB pays for dr gilmores and mwl168 pcbs and call it a day? TOTALLY AGREE. Quote Link to comment Share on other sites More sharing options...
gepardcv Posted July 3, 2015 Report Share Posted July 3, 2015 Mine is correct as of now (also edited my original request post to add some LV boards for potential future Dynalo builds). I assume that entering "4" for any split board means "2 sets, each consisting of 2 left and 2 right boards" or "2 sets, each consisting of 2 positive and 2 negative boards". We absolutely should cover KG and mwl168's board costs! Quote Link to comment Share on other sites More sharing options...
sorenb Posted July 3, 2015 Report Share Posted July 3, 2015 @Gepardcv: Thanks for pointing that out. Have added that to the singles (Number of SETS!) ....so in the sheet it states "Number of SETS!" above the column, please check your numbers and sign. Thanks everybody. Mine is correct as of now (also edited my original request post to add some LV boards for potential future Dynalo builds). I assume that entering "4" for any split board means "2 sets, each consisting of 2 left and 2 right boards" or "2 sets, each consisting of 2 positive and 2 negative boards". We absolutely should cover KG and mwl168's board costs! Quote Link to comment Share on other sites More sharing options...
palchiu Posted July 4, 2015 Report Share Posted July 4, 2015 (edited) mwl168 Thanks for organizing the GB Update mine 2x V3 Amp, 2x Fat PSU. Edited July 4, 2015 by palchiu Quote Link to comment Share on other sites More sharing options...
gepardcv Posted July 4, 2015 Report Share Posted July 4, 2015 Wait, that's the opposite of what I wrote. Now 4 means "4 sets, each consisting of 4 left and 4 right boards, for a total of 8 PCBs"? Quote Link to comment Share on other sites More sharing options...
mwl168 Posted July 4, 2015 Author Report Share Posted July 4, 2015 (edited) I dont know about other GBs, but this one seems huge ... And would require a lot from mwl168 ...repacking and stuff....how about the GB pays for dr gilmores and mwl168 pcbs and call it a day? Thanks for the kind offering. I appreciate it. No need to cover my sets but I don't feel right charging Kevin for the boards myself. I second the proposal that we cover Kevin's boards. It's voluntary of course so please PM me if you don't want to take part. The numbers of boards have changed quite a bit so I need to get new quotes from the fab houses. I am going to wait a few days for all the participants to have the chance to update their numbers. Once the dusts are settled so to speak, I'll get new quotes and post the information here. To be clear and consistent, please use number of boards as the unit NOT SET. For one pair of the amp boards, please put down 2 as the quantity. Same applies to the single PS boards. Edited July 4, 2015 by mwl168 Quote Link to comment Share on other sites More sharing options...
catfiste Posted July 4, 2015 Report Share Posted July 4, 2015 Thanks for the spreadsheet! My numbers were correct but I made some changes and dated them. Quote Link to comment Share on other sites More sharing options...
chinsettawong Posted July 4, 2015 Report Share Posted July 4, 2015 Just updated my quantity. Thanks. Quote Link to comment Share on other sites More sharing options...
insanity Posted July 4, 2015 Report Share Posted July 4, 2015 checked and added 2 LVsingle boards Quote Link to comment Share on other sites More sharing options...
wokstarr26 Posted July 4, 2015 Report Share Posted July 4, 2015 (edited) Checked and adjusted v3 amp boards to 2 Edited July 4, 2015 by wokstarr26 Quote Link to comment Share on other sites More sharing options...
UFN Posted July 4, 2015 Report Share Posted July 4, 2015 Updated my entry on the spreadsheet, thanks a lot to MWL and soren for doing this //UFN Quote Link to comment Share on other sites More sharing options...
sorenb Posted July 4, 2015 Report Share Posted July 4, 2015 @UFN: Thanks, but I really do not contribute that much. This is MWL168 who is doing 99,9% of the work. Just checked the status +300 boards .... at 30USD pr board (just a figur) we're at 9000USD ... quite a substantial figur in my book. A total of 33 people participates ... lets say that unpacking takes an hour ...and 20 min for each package that is 12 hours in total ...almost two days of work I know mwl168 is too modest to accept the acknowledgement ... but honestly it will only be an acknowledgement of the contribution rather than a compensation. I have put in a column for participating in the "Acknowledgement" and as mwl168 stated people are free to participate in the GB anyways, I have taken the liberty to put "Yes" in that column, so you need to change it if you for some reason cannot participate. 1 Quote Link to comment Share on other sites More sharing options...
UFN Posted July 4, 2015 Report Share Posted July 4, 2015 I have put in a column for participating in the "Acknowledgement" and as mwl168 stated people are free to participate in the GB anyways, I have taken the liberty to put "Yes" in that column, so you need to change it if you for some reason cannot participate. +1 on this //UFN Quote Link to comment Share on other sites More sharing options...
kevin gilmore Posted July 5, 2015 Report Share Posted July 5, 2015 (edited) for the 550v caps there is conflicting information whether they are 2 lead or 4 lead, trying to find out real information, I think they are actually 4 lead. updating all layouts with both the 2 and 4 lead versions Edited July 5, 2015 by kevin gilmore Quote Link to comment Share on other sites More sharing options...
s_r Posted July 5, 2015 Report Share Posted July 5, 2015 The data sheet off mouser for the kemets I have selected say it's 2 lead (since A is the termination code right after ALC10). Quote Link to comment Share on other sites More sharing options...
spritzer Posted July 5, 2015 Report Share Posted July 5, 2015 The ones I bought were 2 lead but they are only 180uf Quote Link to comment Share on other sites More sharing options...
kevin gilmore Posted July 5, 2015 Report Share Posted July 5, 2015 (edited) the following files have been updated with both footprints, please check for errors ...newleftfat ...newrightfat ...circlotronhvsingle there seem to be multiple errors in the kemet pdf for example size codes f and k do not exist http://gilmore.chem.northwestern.edu/circlotronhvpowersingle.jpg if you are planning on making any of the power supply boards make sure they have today's date or later on them. if not ask. Edited July 5, 2015 by kevin gilmore Quote Link to comment Share on other sites More sharing options...
b0bb Posted July 5, 2015 Report Share Posted July 5, 2015 @UFN: Thanks, but I really do not contribute that much. This is MWL168 who is doing 99,9% of the work. Just checked the status +300 boards .... at 30USD pr board (just a figur) we're at 9000USD ... quite a substantial figur in my book. A total of 33 people participates ... lets say that unpacking takes an hour ...and 20 min for each package that is 12 hours in total ...almost two days of work I know mwl168 is too modest to accept the acknowledgement ... but honestly it will only be an acknowledgement of the contribution rather than a compensation. I have put in a column for participating in the "Acknowledgement" and as mwl168 stated people are free to participate in the GB anyways, I have taken the liberty to put "Yes" in that column, so you need to change it if you for some reason cannot participate. Soren, I tried to check the spreasheet for latest additions. The google page says the sheet is tagged for deletion, has something happened to it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.