mwl168 Posted September 9, 2015 Author Report Share Posted September 9, 2015 Sent 12 packages out today. More will go out tomorrow. Still waiting for USPS to deliver the large padded envelopes I ordered so I can finish packing all the orders.The overseas shipping will be quite high due to the weight of the boards. Most will likely be around $26.50 US for USPS Priority Mail (up to 4 lb max weight). The only cheaper USPS fair is the First Class mail which only saves about $3 once the weight of the package goes above 24 oz. As a reference, 2 Carbon V5 plus 2 HV Single Fat boards weight in around 11oz.. It's a rotten deal for those outside of US - in some cases the shipping ends up costing almost as much as the boards. On to another matter - should we start a new dedicated thread for the KGSSHV Carbon build? If enough people think this is a good idea, I can start a new thread with some preliminary information including BOM for the V5 boards and GR HV PS. Speaking of which, I have not found a way to attach a spreadsheet - I know I was able to do that before the forum software was updated a few weeks ago. Thoughts? Quote Link to comment Share on other sites More sharing options...
wokstarr26 Posted September 9, 2015 Report Share Posted September 9, 2015 Sent US$26.50 via Paypal.Due to the weak Aussie currency and PP charges it comes to A$41.09!!!!!However eagerly looking forward to receiving the boards.Thanks again for the GB Quote Link to comment Share on other sites More sharing options...
UFN Posted September 9, 2015 Report Share Posted September 9, 2015 Will you send out requests for the shipping costs?I think a separate Carbon build thread is a good idea. //UFN Quote Link to comment Share on other sites More sharing options...
Victor Chew Posted September 9, 2015 Report Share Posted September 9, 2015 Yes, good idea to start a new thread. Quote Link to comment Share on other sites More sharing options...
Laowei Posted September 9, 2015 Report Share Posted September 9, 2015 +1 on a new build thread. Quote Link to comment Share on other sites More sharing options...
mwl168 Posted September 10, 2015 Author Report Share Posted September 10, 2015 Another batch of packages posted today (Wednesday 9/9), all US destined packages have been sent. More packages will be posted tomorrow. On track to have all packages posted by end of this week. Quote Link to comment Share on other sites More sharing options...
Laowei Posted September 10, 2015 Report Share Posted September 10, 2015 Received my Carbon PCBs today. Very well packaged and everything looks great. Thanks for making this happen, Michael. A most excellent job! Quote Link to comment Share on other sites More sharing options...
mwl168 Posted September 11, 2015 Author Report Share Posted September 11, 2015 (edited) All boards have been shipped as of today. Please let me know when you receive them.Happy building! EDIT 9/12: It's ironic, the padded envelopes I ordered from USPS showed up yesterday, same day I finished shipping all packages Edited September 12, 2015 by mwl168 Quote Link to comment Share on other sites More sharing options...
chiguy Posted September 11, 2015 Report Share Posted September 11, 2015 Just received my boards today. Thanks again! =) Quote Link to comment Share on other sites More sharing options...
Pars Posted September 12, 2015 Report Share Posted September 12, 2015 Got mine as well. Thanks for the great job handling this group buy Michael! Quote Link to comment Share on other sites More sharing options...
eggil Posted September 12, 2015 Report Share Posted September 12, 2015 Receive mine also. Packed nice and tidy. Boards look great. Thanks! Quote Link to comment Share on other sites More sharing options...
b0bb Posted September 14, 2015 Report Share Posted September 14, 2015 Got mine. Thanks for the effort, much appreciated. Quote Link to comment Share on other sites More sharing options...
Kerry Posted September 14, 2015 Report Share Posted September 14, 2015 ^ This.Thank you! Quote Link to comment Share on other sites More sharing options...
gepardcv Posted September 14, 2015 Report Share Posted September 14, 2015 My boards came in also. Thanks! Quote Link to comment Share on other sites More sharing options...
blubliss Posted September 14, 2015 Report Share Posted September 14, 2015 Boards came this morning. They look great. Well done! Quote Link to comment Share on other sites More sharing options...
bbest Posted September 16, 2015 Report Share Posted September 16, 2015 Unfortunately I was late to GB. Could somebody sell:kgsshvpssicfetsinglenewleftfatkgsshvpssicfetsinglenewrightfatbias? Quote Link to comment Share on other sites More sharing options...
judo Posted September 16, 2015 Report Share Posted September 16, 2015 Boards have come. Packing and sending all was not a little work, thanks for it!I have not built any serious in the last years any clue sourcing the parts from EU sellers to avoid the + 30 % cost and the fiddling with customs? Quote Link to comment Share on other sites More sharing options...
UFN Posted September 16, 2015 Report Share Posted September 16, 2015 (edited) Not sure exactly where you are located, but I more or less buy everything from Mouser now. Massive selection of parts and very simple ordering. I do get charged local VAT on top of their prices, but it's done immediately and there's no fiddling with customs, additional fees or delayed bills etc. afterwards.Shipping is free for orders above 65 EUR. It's via FedEx which wouldn't be my first choice, but it works well and it's a fairly consistent two-day delivery (so order on Tuesday night EU-time and delivered during Thursday or Friday at the latest).I do still use Reichelt and TME sometimes, but it is getting less and less frequent. If you are in a country where RS/Farnell is an option that could work as well, but IME prices are much higher.//UFN Edited September 16, 2015 by UFN Quote Link to comment Share on other sites More sharing options...
judo Posted September 16, 2015 Report Share Posted September 16, 2015 Thanks for the answer. I ordered from Mouser a few years ago but I do not remember the conditions so your info is useful.. Rs is expensive I agree. That +30 comes from the VAT+duty. in my place. The costs depend on that too how many places you can get the parts from. This depends on the BOM and the question maybe for the building thread. Quote Link to comment Share on other sites More sharing options...
JoaMat Posted September 16, 2015 Report Share Posted September 16, 2015 (edited) / Edited November 11, 2015 by JoaMat Quote Link to comment Share on other sites More sharing options...
UFN Posted September 16, 2015 Report Share Posted September 16, 2015 Thanks for the answer. I ordered from Mouser a few years ago but I do not remember the conditions so your info is useful.. Rs is expensive I agree. That +30 comes from the VAT+duty. in my place. The costs depend on that too how many places you can get the parts from. This depends on the BOM and the question maybe for the building thread.No problems. Note that the duty is supposed to be included in the EU-prices (euro or other local currency) so you only pay VAT on top (25% for me) - unless you're VAT registered of course. The VAT amount is just added to the amount deducted from your credit card at check out (although it's not visible until just before you confirm the order). I live in Sweden. If I make an order not later than evening 8 a 'clock Swedish local time with Mouser - I have a nice guy knocking at my door at 10.30 am day two. Less than 48 hours from the US.I can order much later in the evening than that, but my orders are mostly small and probably don't take long to pick and pack //UFN Quote Link to comment Share on other sites More sharing options...
judo Posted September 16, 2015 Report Share Posted September 16, 2015 I know how VAT works But when you buy from a non EU country you usually can not buy VATless and you pay your own VAT additionally. I do not know the state of Mouser(there is an Europian subsidiary or not) and how its base price is calculated. Of course the real price is what counts. Quote Link to comment Share on other sites More sharing options...
mwl168 Posted September 16, 2015 Author Report Share Posted September 16, 2015 I am whining but I am in US and just placed a large order with Mouser ($300 +) and I have to pay shipping. I guess that beats having to worry about VATAlso, Mouser does not carry LT1021, the 10M90S and C2M1000170D are back-ordered, and the aluminum oxide insulator 4171G for TO220 is not in stock at the moment. These are all available at Digikey. Quote Link to comment Share on other sites More sharing options...
judo Posted September 16, 2015 Report Share Posted September 16, 2015 My deepest sympathy but it can not be 30 % or is it? Quote Link to comment Share on other sites More sharing options...
UFN Posted September 16, 2015 Report Share Posted September 16, 2015 I guess that beats having to worry about VATYes, by a very long way... //UFN Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.