Guss2 Posted January 5, 2015 Report Posted January 5, 2015 I need to change the headband pad on my HE90 but I've never actually done it before. Can anyone here talk me through it so it makes sense and I don't break something? I think the cups have to come off but I'm not positive. Any help would be appreciated, Gary.
n3rdling Posted January 6, 2015 Report Posted January 6, 2015 I don't exactly remember, but I think it becomes obvious once you pull one of the ends of the old pad towards the middle. I think there are some small screws underneath that you have to remove and then you can pull the whole spring steel part out.
purk Posted January 6, 2015 Report Posted January 6, 2015 I think you have to unscrew one earcup to gain access to the headband to do it. I can't remember exactly either. Luckily the headband last a lot longer than the earpads.
Guss2 Posted January 6, 2015 Author Report Posted January 6, 2015 Thanks guys, I'll use the info and investigate further.
bozebuttons Posted January 6, 2015 Report Posted January 6, 2015 Should be 2 small screws behind where it says HE90 on the headband swivel
spritzer Posted January 6, 2015 Report Posted January 6, 2015 Be careful with those screws as... well Sennheiser uses the cheapest crap they can find so they strip easily.
Guss2 Posted January 6, 2015 Author Report Posted January 6, 2015 Well, I finally got it and what a pain in the ass it was. Stretching the pad over the headband was the tricky part and pretty time consuming at that. Spritzer, I think I may have stripped one of the screws ever so slightly but it still had some bite so I think I'm good. I appreciate all the advice guys, thank you. Gary
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now