Jump to content

Recommended Posts

Posted

Not really needed as long as the drive is SMART capable and SMART is enabled.  If SMART lists a lot of reallocated sectors on a drive I'll consider replacing it because that's a very good sign that the drive is going to be dead soon.  This is in addition to relying on the raid array to mark dead/dying drives as failed.

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Not really needed as long as the drive is SMART capable and SMART is enabled.  If SMART lists a lot of reallocated sectors on a drive I'll consider replacing it because that's a very good sign that the drive is going to be dead soon.  This is in addition to relying on the raid array to mark dead/dying drives as failed.

 

That's what I use as well and it's really what I meant by diagnostics. I also personally like to proactively run a burn in test on new drives using badblocks (or any program that'll systematically read/write every block on a drive), I've found that prunes out any drives that inevitably end up with an early death.

Posted

to proactively run a burn in test on new drives using badblocks

 

That's a very good idea, since in most cases if a drive is going to die it'll happen within the first month of it's use.

Posted

Thanks for the feedback guys, it has been helpful. So I finally decided on the 1512+ since it is way more than I need now by itself and when I need to expand in 2 years, I can add a 5 bay expansion unit. I'm definitely going to take my time and make sure I set everything up right. I bought a new gigabit switch that is compliant with the link aggregation capability of the NAS and will switch out all Ethernet cables to and from the switch with Cat6. Also bought a dedicated UPS for the unit. Should be plenty fast enough as my main concern is reliability and constancy of data access. Currently have 2 WD red 3Tb HDDs and have just ordered 4 more. 15 Tb should be a good start.

Oh, and the 2 HDDs came from Newegg and each drive was bubble wrapped, put in its own box and then the two boxes were packed in a larger shipping box. Looked good but I have not tested them yet. Anyone have a MAC or Windows counterpart to badblocks? Not going to mess with Linux.

Posted

Grats on the purchase and it's good to hear that Newegg shipped the hard drives well. A somewhat comparable Windows counterpart would be Barts Stuff Test which I've used before. It looks like they've discontinued the pro version so you're limited to file level , but that should generally be good enough.

Posted

Yep, but this is Head-Case after all. Seriously, I had to change the switch anyway and most of the cables were cat5 so it seemed like a good idea to just go cat6 for a little future proofing.

  • 2 weeks later...
Posted

Latest shipment of drives from newegg was significantly worse in packaging:

 

if4jky8l.jpg

 

The side that was basically resting on the box had a couple of popped bubbles, so we'll see how well these drives fare though a break-in session.

Posted

Newegg drive packaging is usually pretty bad - the only way to guarantee good packing is if you get 5 or more at a time, then usually they'll just re-use the original packing from the HD manufacturer.

Posted

Newegg drive packaging is usually pretty bad - the only way to guarantee good packing is if you get 5 or more at a time, then usually they'll just re-use the original packing from the HD manufacturer.

 

In this case I ordered 5 and they cut a section of the original packing from the HD manufacturer. Last time around they sent 5 with the full crate and box, which is perfect. This time around they didn't :(

Posted

How many are in the manufacturer's packaging?  6?  12?  It'd probably behoove to just get the same number.

 

That said -- good to know.  I'll get my hard drives from MicroCenter from now on.  Not that I am not hard on drives.

Posted

Latest shipment of drives from newegg was significantly worse in packaging:

 

if4jky8l.jpg

 

The side that was basically resting on the box had a couple of popped bubbles, so we'll see how well these drives fare though a break-in session.

They must not like you :D. My drives were packaged about like yours but with a lot more bubble wrap and they were enclosed with paper padding on all sides. So definitely a step down from the previous packaging, but not really bad.

Posted

or just buy retail packaged drives

 

Yeah, I thought of doing that but remembered they packed it well last time...back to the retail drives I go for any future purchases!

  • 7 months later...
Posted

I am finally ready to put one of these together.  My wifi HD is on its way out so I need to build up a replacement.  If I am looking for between 6-12TB of storage, which box would be my best investment?

Posted

Agreed - I've been using a 1511 for a couple years now and it's been trouble free and performs well enough to easily max out a single gigabit connection..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.