tyrion Posted December 17, 2012 Report Share Posted December 17, 2012 When you are sitting on the sit and stopped are you able to get your foot flat on the ground or it is just the tip of your toes. I have long legs and i'm on the tips of my toes when I put my foot down while seated. Quote Link to comment Share on other sites More sharing options...
VPI Posted December 17, 2012 Report Share Posted December 17, 2012 Mostly just the tips of my toes, just like my road bike. Quote Link to comment Share on other sites More sharing options...
n_maher Posted December 17, 2012 Report Share Posted December 17, 2012 Mike, Remember that your riding position, especially seat height will probably be a lot different on your MTB compared to your road bike. I ride with a significantly lower seat heigh on the MTB. Even on a FS bike you don't want to get whacked with a seat when your flying downhill (I need a dropper post, thx for the reminder) and you should be spending a significant amount of time out of the saddle anyway. But it's a nice looking ride and yes, the newer FS bikes are huge. It's crazy how much bigger the Jekyll is than my FS Gary Fisher. Quote Link to comment Share on other sites More sharing options...
VPI Posted December 17, 2012 Report Share Posted December 17, 2012 I want my seat high, as I do not have a dropper, because it makes those crazy inclines much more achievable. I know this negatively affects handling but I have not really had any issues that I couldn't get through. A dropper would be ideal but everything I read on any of them makes them look like unreliable nonsense. I think my road bike and mountain bike seats are pretty close to have the 30% knee angle. Quote Link to comment Share on other sites More sharing options...
tyrion Posted December 17, 2012 Report Share Posted December 17, 2012 Thanks. I'm going to try to get out one morning this week. In order to ride the park which is about 6 miles from me, I have to watch a video, sign a waiver and get a card showing I am in compliance. This is new since I rode there more than 10 years ago. It's in a county park so I get it. I need to find when they are open in the morning so I have enough time to get a short ride in. Quote Link to comment Share on other sites More sharing options...
VPI Posted December 17, 2012 Report Share Posted December 17, 2012 Glad I never had to go through any of that to ride. Quote Link to comment Share on other sites More sharing options...
boomana Posted December 17, 2012 Author Report Share Posted December 17, 2012 Nice, Mike. So, I got good news today. My cast was supposed to come off next Monday, but my doc's office called, and they want to close early, so I get my cast off on Friday. Yay! I've already scheduled my Calfee fitting for next Wednesday. Getting closer......... 2 Quote Link to comment Share on other sites More sharing options...
MexicanDragon Posted December 17, 2012 Report Share Posted December 17, 2012 Mike, you shouldn't be touching the ground when you're on the saddle. Maybe with tip-toes, if you're leaned over. Enjoy the new ride, can't wait to hear a report. **BRENT** 1 Quote Link to comment Share on other sites More sharing options...
c12mech Posted December 18, 2012 Report Share Posted December 18, 2012 The wife green lighted a new bike with the stipulation that if my truck dies I have to ride the bike until we save for a new vehicle for me. It's okay since it does not rain much here and it is always riding weather. Since I don't have an LBS I'm on my own as far as fit goes. I know from a couple of websites that take your measurements and give you a starting point that I need something with a 53-54cm seat post. I road a Specialized Roubaix in 58 while back home and it felt good. Unfortunately I cannot get one of those shipped here so I have to go with someone who ships to me. I have looked at some Kestrel models and am wondering if anyone has rode one of these. I see mixed reviews for them. I rode one years ago but only for a short test ride. I could not afford it then so did not take it out long. I also keep looking at the Colnago CLX 3.0 and the BMC Road Racer SL01. Those are both at the top of my spending range. I also considered going with bikes direct and getting one of the Motobacane bikes with a good group and upgrading frames in a year or so. I have a friend who rides one of their bikes and is happy as can be with it. Just not really sure what to do right now. Quote Link to comment Share on other sites More sharing options...
n_maher Posted December 18, 2012 Report Share Posted December 18, 2012 If you rode a 58 and it felt good I can't imagine you feeling anything but cramped on a 54. How tall are and what's your inseam? Quote Link to comment Share on other sites More sharing options...
c12mech Posted December 18, 2012 Report Share Posted December 18, 2012 (edited) I am 6'00" with a 32" inseam. The inseam measurement was measured according to a couple of different sites. According to all my measurements I should look for a 53 center-to-center of 54 center-to-top frame size. I swear every site I look at has the frame sizes listed differently. It gets confusing after a while. I just looked at the specs on the Roubaix 58 and the center-to-top is 54cm. So I guess that is what I am looking for. Even without a fitting that was the most comfortable I've been on a bike in years. Edited December 18, 2012 by c12mech Quote Link to comment Share on other sites More sharing options...
jp11801 Posted December 18, 2012 Report Share Posted December 18, 2012 I'm 6ft and a 32 inseam and ride a 56cm CAAD 10 Quote Link to comment Share on other sites More sharing options...
n_maher Posted December 18, 2012 Report Share Posted December 18, 2012 The Roubaix has a sloped top tube so the measurements that you're looking at are not going to be the same from bike to bike. I'm pretty much the same size as you maybe an inch taller but the 58 Roubaix is a great fit for me. What sites are you looking at that are telling you you want something in the 53 to 54 size range? Quote Link to comment Share on other sites More sharing options...
c12mech Posted December 18, 2012 Report Share Posted December 18, 2012 I was using the fit system on wrenchscience.com. They have all there bike frames listed by c-t-c or c-t-t. I was completely confused at first then I figured out what they were doing and it made sense. Bikesdirect does the same thing as do a couple of other sites. I've gotten to the point of making sure to look at the geometry page to make sure of what I am looking at. Quote Link to comment Share on other sites More sharing options...
Pars Posted December 18, 2012 Report Share Posted December 18, 2012 Yeah, I would agree. I an 5'8" with a 30" inseam (can't remember my cycling inseam) and a 53/54 is what I should ride. My RRA is a 22 1/2" C-T, but fits me fine.You should be on a minimum of a 56. You would be very cramped on a 53 or 54. Your reach measurement and top tube length (or effective length) is more important though. Quote Link to comment Share on other sites More sharing options...
c12mech Posted December 18, 2012 Report Share Posted December 18, 2012 The one thing I do not want to do is be "stretched out" while riding. On my current bike I feel that way and it is not comfortable at all after a couple of miles. It is a mountain bike though and when going down hills it feels fine but not for any extended period of just riding along. When I rode the Roubaix in a 58 it felt right. I'm sure if I had it fitted to me it would have been even better. I'm really kicking myself for not buying it when I was on vacation. Now I just have to decide which to get. I cannot find anywhere that will sell the Roubaix online so I'm looking at other options. Right now the Colnago CLX 3.0 is my top choice with the BMC Road Racer SL01 a close second. These are at the top of my price range and I would prefer to spend less but I also want something that should last me for a long time. Quote Link to comment Share on other sites More sharing options...
CD44hi Posted December 18, 2012 Report Share Posted December 18, 2012 (edited) Specialized forbids online sales, so no legit bike store should be able to sell you one under warranty. And I obviously would Not recommend buying one online, because It'll have no warranty regardless. Nor the colnago or bmc have much of a relaxed geom. I think a 56ish or M/L with a Relaxed geom may be of consideration. Maybe looking into a giant OCR type geometry should provide a less "stretched" out feeling overall. Edited December 18, 2012 by CD44hi Quote Link to comment Share on other sites More sharing options...
deepak Posted December 18, 2012 Report Share Posted December 18, 2012 If you rode a 58 and it felt good I can't imagine you feeling anything but cramped on a 54. How tall are and what's your inseam? Speaking of which, does anyone have a proper way of measuring inseam? There doesn't seem to be a standard way of doing it and I come up +/- 2" the times I have tried... which is a rather large window of error (and it has nothing to do with how cold it is ) Quote Link to comment Share on other sites More sharing options...
Pars Posted December 18, 2012 Report Share Posted December 18, 2012 Press a book or something between your legs, standing straight up, bare or stocking feet. Measure top of book to the floor. Quote Link to comment Share on other sites More sharing options...
c12mech Posted December 18, 2012 Report Share Posted December 18, 2012 Thanks for all this help guys. I really wish that I was in the states and could just go to a shop and get what I wanted. It would make life a lot easier. That being said, can anyone recommend a good online retailer to buy from? I have bought from Jenson and Pricepoint before but it was just tools and wheels, not a whole bike. Quote Link to comment Share on other sites More sharing options...
n_maher Posted December 18, 2012 Report Share Posted December 18, 2012 Honestly, if there's something that you really want but can't find online I would simply engage a proxy to buy it at a local shop, have it partially assembled and then prepped for shipment to you. Quote Link to comment Share on other sites More sharing options...
Dreadhead Posted December 19, 2012 Report Share Posted December 19, 2012 Wrench science and competitive cyclist are good online businesses that sell whole bikes. I had a very good experience with Neuvation bikes myself if you are looking for high performance per dollar and don't care about brand. Quote Link to comment Share on other sites More sharing options...
VPI Posted December 19, 2012 Report Share Posted December 19, 2012 Any of you guys have any experience with Continental Grand Prix 4000s tires? I am trying to pick tires for the new wheels and they like these at the shop. Quote Link to comment Share on other sites More sharing options...
Dreadhead Posted December 19, 2012 Report Share Posted December 19, 2012 (edited) Jeff I am a fan and run them during the summer. I run Continental gatorskins otherwise and really like them for winter because they deal with road salt very well and don't flat (as much). Edited December 19, 2012 by Dreadhead Quote Link to comment Share on other sites More sharing options...
tyrion Posted December 19, 2012 Report Share Posted December 19, 2012 Funny you mention the GP 4000 because I got a flat this morning in one. They are nice tires but I need me some skins. I ordered some ultras. On a similar note and because I am jinxed I checked the mtb today and the rear tire was flat. I rode it on my block last night for 5 minutes for gods sake. I took off the tire, which was quite a feat. I found a small hole, patched it. Now I can't get the tire back on. Any recommendations would be welcome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.