justin Posted July 6, 2012 Report Share Posted July 6, 2012 I've decided to create a new division of HeadAmp dedicated to offering DIY parts (both in-house made as well as reselling such as transistors). It's just less stressful and overall more enjoyable dealing with DIYers (of course, this is just in addition to selling the HeadAmp made amps/DACs) I'll have to come up with a list of items. So this is a "Wanted" thread. Current items: - Custom machined Teflon Stax Jacks (pro or normal bias) Quote Link to comment Share on other sites More sharing options...
ujamerstand Posted July 6, 2012 Report Share Posted July 6, 2012 (edited) Not really parts, but... Laser Engraving service? Other than that, If we can get some reasonably priced C3675, that would be nice. Edited July 6, 2012 by ujamerstand Quote Link to comment Share on other sites More sharing options...
dsavitsk Posted July 6, 2012 Report Share Posted July 6, 2012 (edited) I guess the obvious of matched JFETs -- what would be really nice would be the ability to order by spec. Case parts are always hard to find. Perhaps little modules to compete with TP? Edited July 6, 2012 by dsavitsk Quote Link to comment Share on other sites More sharing options...
Dusty Chalk Posted July 6, 2012 Report Share Posted July 6, 2012 It's just less stressful and overall more enjoyable dealing with DIYers...Really? Oh, you mean REAL DIYers... Quote Link to comment Share on other sites More sharing options...
justin Posted July 6, 2012 Author Report Share Posted July 6, 2012 Not really parts, but... Laser Engraving service? Other than that, If we can get some reasonably priced C3675, that would be nice. i can do laser engraving, the problem is just that it's highly risky without having a setup piece to test it out first. plus the time involved to get it into the proprietary laser software. Front Panel Express is still the best way to go for something like this (though its a different kind of engraving) as they have developed their own CAD software and programming on their end to get it on the machine is probably minimal. small production runs would probably work better, or doing engraving on a standard part (such as a pre-cut panel where all the dimensions/holes are already known) Quote Link to comment Share on other sites More sharing options...
deepak Posted July 6, 2012 Report Share Posted July 6, 2012 Would love some nice aluminum knobs (I know, I know how can you take this post seriously and all, but I am serious ) Quote Link to comment Share on other sites More sharing options...
Victor Chew Posted July 7, 2012 Report Share Posted July 7, 2012 Nice idea Justin . As regards semiconductors, this will be really helpful hopefully to solve the problems of fake and/or difficult to get parts. Can you let us know the list of semi-cons you intend to offer or do you want postings of what is needed or both? Will there also be matching services offered? Quote Link to comment Share on other sites More sharing options...
Nebby Posted July 7, 2012 Report Share Posted July 7, 2012 I know your heatsinks are distinctive, but any chance you could sell them? Quote Link to comment Share on other sites More sharing options...
justin Posted July 7, 2012 Author Report Share Posted July 7, 2012 (edited) I know your heatsinks are distinctive, but any chance you could sell them? i could, but i doubt anyone would like the cost. my cost is about $13.50/foot + shipping for the metal (each 1ft is about 3lb of aluminum). then there would be cutting them, drilling/tapping holes, possibly applying a paint or anodizing. this doesnt include the die charge that was already paid some sort of full enclosure w/ 1/8" front/back/top/bottom panels would probably be a $500-600 item. Edited July 7, 2012 by justin Quote Link to comment Share on other sites More sharing options...
johnwmclean Posted July 7, 2012 Report Share Posted July 7, 2012 (edited) Sounds like a great idea Justin. I know your heatsinks are distinctive, but any chance you could sell them? ^ This Edited July 7, 2012 by johnwmclean Quote Link to comment Share on other sites More sharing options...
livewire Posted July 7, 2012 Report Share Posted July 7, 2012 I would love to get my hands on some of those sexy heatsinks! A set of BH pcbs would be nice too (or access to the gerbers - so i could fab a set). I asked nattonrice about this, but he ignored me. You are welcome to ignore me too. Quote Link to comment Share on other sites More sharing options...
nattonrice Posted July 7, 2012 Report Share Posted July 7, 2012 (edited) I ignored you!? Sorry! Only remember a request at the other site for a ixys ccs board from someone people that I cock an eyebrow about (and I did ignore him them ). I don't actually have gerbers for the bh boards that I used (I got an old set from KG a while back). As for the actual thread, yeah 3675, 1968, 1486, etc. If you could beat bdent then that would be awesome. Actually IXY devices can be a pita to get except from Future Elec so there's another. Especially with the kgsshv's and all the rest that are being built. Edited July 7, 2012 by nattonrice Quote Link to comment Share on other sites More sharing options...
PICaudio Posted July 7, 2012 Report Share Posted July 7, 2012 I'm sure that I will buy some components for my next proyects. This could be a good choice to find the components that I can't buy in my country. Fantastic news, fantastic idea Justin. -- o -- Rodrigo Quote Link to comment Share on other sites More sharing options...
The Monkey Posted July 7, 2012 Report Share Posted July 7, 2012 AA Batteries. Quote Link to comment Share on other sites More sharing options...
recstar24 Posted July 7, 2012 Report Share Posted July 7, 2012 Bacon. Quote Link to comment Share on other sites More sharing options...
justin Posted July 7, 2012 Author Report Share Posted July 7, 2012 I ignored you!? Sorry! Only remember a request at the other site for a ixys ccs board from someone people that I cock an eyebrow about (and I did ignore him them ). I don't actually have gerbers for the bh boards that I used (I got an old set from KG a while back). didnt happen to be a DIYer that was only buying your parts to help some other guy prototype, was it? Quote Link to comment Share on other sites More sharing options...
sridhar3 Posted July 7, 2012 Report Share Posted July 7, 2012 Cool idea. HE90 panel-mount jacks, male and female HE90 (Fischer) connectors perhaps? Quote Link to comment Share on other sites More sharing options...
Horio Posted July 7, 2012 Report Share Posted July 7, 2012 (edited) Even though they wouldn't come cheap, I bet your heatsinks would be a popular item. I'd add some of the commonly used film caps too, like the 0.1uF/1000V and 0.22uF/1000V. The later are a little harder to get a hold of. Maybe even some of the larger 680uF/450V aluminum caps. They aren't super cheap on Mouser/Digikey, and I'm sure you could get a much better price in bulk. Great idea Justin, and much appreciated by us DIYers! Edited July 7, 2012 by Horio Quote Link to comment Share on other sites More sharing options...
justin Posted July 7, 2012 Author Report Share Posted July 7, 2012 Cool idea. HE90 panel-mount jacks, male and female HE90 (Fischer) connectors perhaps? i can get them, unfortunately, the price has increased 2.5x since i originally bought them for the Aristaeus in 2005! Quote Link to comment Share on other sites More sharing options...
n3rdling Posted July 7, 2012 Report Share Posted July 7, 2012 Rk50 Quote Link to comment Share on other sites More sharing options...
justin Posted July 7, 2012 Author Report Share Posted July 7, 2012 (edited) Rk50 could do that. my experience with pot/DACT sales is everyone is obsessed with 100K i have a whole bunch of Alps RK27 (Blue), but i think thats kind of been taken over by ebay Chinese sellers that are either selling fake parts or real parts for a $0.25 margin Edited July 7, 2012 by justin Quote Link to comment Share on other sites More sharing options...
justin Posted July 8, 2012 Author Report Share Posted July 8, 2012 just checked the stock i have 3,800 each of 2SK170-BL and 2SJ74-BL in unopened bags of 200. i feel bad putting them in amps. retirement JFETs!! Quote Link to comment Share on other sites More sharing options...
Victor Chew Posted July 8, 2012 Report Share Posted July 8, 2012 Will you match them and sell it to us? I will need 5 quad sets of 2sk170bl and 2 quad sets of 2sj74-bl. Quote Link to comment Share on other sites More sharing options...
justin Posted July 8, 2012 Author Report Share Posted July 8, 2012 amb has matched quads, and i noticed bdent is doing some kind of matching now too 1 Quote Link to comment Share on other sites More sharing options...
nattonrice Posted July 8, 2012 Report Share Posted July 8, 2012 didnt happen to be a DIYer that was only buying your parts to help some other guy prototype, was it? This is exactly what came to mind with one in particular. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.