Search the Community

EDIT 8/4: attach updated GB details and remov outdated chart EDIT 7/31: attach updated GB details and remov outdated chart EDIT 7/27: attach GB details and remov outdated chart EDIT 7/23: attach PCB cost quotes and limit first time poster to 4 set of amp boards max. EDIT 7/19: proposing use of HV Carbon V5 board to replace both V2 and V3 boards. See posting # 190. EDIT 7/13: attach snapshot of final order entries and board count. EDIT 7/12: This GB is officially closed as of 7/12/2015. Due to the changes Kevin made to the PS boards, it'll take a few more days for these boards to be checked before I officially request quotes from the fab houses. I hope to have information on the cost of the various boards to share in a week or so. I will post an image of the spreadsheet here for all to review. EDIT 7/9: Please double check and confirm or make any final updates to your record on the spreadsheet by end of day Saturday, July 11. On Sunday, July 12, I will officially close the GB, lock down the counts of the various boards, post a snap shot of the spreadsheet on this thread for your review and proceed to request final quotes from the fab houses. As promised, I am planning a KGSSHV Carbon GB which includes both the amp boards and the PS boards. First I like to gauge the interest for the GB which will also help me estimate the cost of the PCB boards. My plan is to make 2mm thick PCB with 2oz copper. (EDIT 0731: HV PS boards are upgraded to 3oz copper) For the amp board, we'll most likely use the latest board, kgsshvcarbonv2.zip and kgsshvcarbonv3.zip that Kevin posted on June 30 which has the cascode CCS and uses mostly current parts including the PZTA SMD parts. This board measures 5.45 x 4.05 inches according to Kevin. THIS BOARD HAS NOT BEEN CHECKED NOR TESTED AT TIME OF WRITING. For the HV PS board, we have the following options (these HV boards contain built-in LV supply): 1. the GoldenReference dual HV (kgsshvpssicfetdual2new.zip that Kevin posted on June 27, 6 x 6.48 inches). I have checked this board by tracing the PCB visually and Kevin has corrected the issues I spotted and updated the schematic accordingly (see Kevin's post #4802 on the KGSSHV thread for the schematic). I cannot guarantee I did not miss something. THIS BOARD HAS NOT BEEN TESTED. 2. the split/single, "skinny" PS boards (one board for each rail), they are kgsshvpssicfetsinglenewleft.zip and kgsshvpssicfetsinglenewright.zip which were also posted on June 28 (3 x 6.48 inches). THESE SINGLE PS BOARDS HAVE NOT BEEN CHECKED NOR TESTED. 3. the split/single, "fat" PS boards (one board for each rail), they are kgsshvpssicfetsinglenewleftfat.zip and kgsshvpssicfetsinglenewrightfat.zip which were posted on June 28 (4.05 x 5.45 inches). THESE SINGLE PS BOARDS HAVE NOT BEEN CHECKED NOR TESTED. For stand alone Golden Reference LV PS, two options (THESE PS BOARDS HAVE NOT BEEN CHECKED NOR TESTED): 1. the dual LV (goldenreferce3.zip) 2. the single LV (goldenrefernceplus4.zip and goldenreferenceminus4.zip) We'll need to at least check these boards before proceeding to have them fabricated for the GB. I will try to find time to trace them but can really use others' help for double-checking. To gauge the interest and to help get an idea of the volume in order to determine the cost, please respond with the following information (be specific) if you are interested in participating in this GB: 1. How many amp boards do you want. (one channel on each board, you need two amp boards for one complete amp.) 2. Which HV PS (dual, single skinny or single fat) and how many of them do you want. (you need at least one dual board or two single boards for one complete amp.) The HV PS has built in LV and bias sections. The separate LV PS and Bias boards are optional. 3. Please use this link to register your request: https://docs.google.com/spreadsheets/d/1GWDWwLfsIDtwn1HB-x76lS6WyWwLd5lwsORFKiUuuEQ/edit?usp=sharing The chart below is for reference only and not up to date. The spreadsheet contains the up to date information. Please let me know if I missed anything. It's advisable to read the the following posts at the minimal for relevant information to this GB: 16, 34, 42, 51, 68, 80, 89, 92, 113. More to come. Thanks! EDIT 6/28: updated information due to the newly released "fat" single PSU and updated gerber files for PCBs EDIT 7/3: added Golden Reference LV and Bias board options and start using sorenb's shared spreadsheet EDIT 7/6: remove early spreadsheet image Note: For the single PS boards, quantity of 2 indicates the participant will receive 1 left and 1 right boards (or 1 plus and 1 minus for the LV).