naamanf

Looks like oak. I would save it for something nicer than painted doors. Place it will take some work filling the grain. Get some paint grade maple or poplar?

It's magical, so of course it can.

Looking back I can see it as well now.

One of them. Test fiting in place meow.

Doug has it. Figure I would add some French flair since it is a Roubo. Plus adding a trailer home or dead squirrel would have been to much work.

I somehow missed this thread, I'll start posting over here for my ping ponging/wood chipping. Made a dovetail. Not perfect, but it was my first try.

X3 on the welds. Made a dovetail.

Sofa king awesome!

Yuge cougar fan.

Latest ping pong action for a retiring Park Ranger.

Thanks, I just whipped it up real quick to make sure I understood how Fusion was going to machine a complex surface, and it would do what I expected. Didn’t want to ruin a $400 chunk of walnut on my first go.

It was. Was more a test of making something with a lot of beveling and lofting to see how it would turn out.

Everything in F360. Since that part worked out I threw caution to the wind and did the top of the coffee table.

First test part cut with Fusion 360.

It is, I took elements of things I like and kind of put it together in my head. So far so good🤞

Yeah it allows you to do some some things that normally would be really difficult. Great thing is once it’s it’s all designed, it’s easily repeatable.

Working on my first ever coffee table. Have the base built, but not finished. Next up is making the top which is going to require me to learn Fusion 360. Top is going to be 2” thick in the middle with a radius on the bottom following the radius on the top of the base.

Plays a straight man very well.

So what is the big show we can go to meow?

I would also assume that floor has an aluminum oxide finish for what that’s worth.

I installed very similar floors in my Texas house. I kept a decent amount of extra boards in case there was ever an accident. Can’t really refinish that type of flooring, and will probably never get a perfect match. Even finding the same flooring probably won’t get an exact match due to wear and batch variances. Hopefully I’m wrong. if you have an extra board a good paint store can try and stain match if you are going to try to repair it Only wood I’ll do now is something that can be sanded and refinished.

Since they haven't built a strip club next to the Gaylord yet, it's a no for me. Right or wrong I've apparently put my life on hold the last 16 months. I can hang on a little longer. Maybe I can start planning Red Neck Jam.

The Bezos has my back.

It turned out really good. And will make tacos for a week.