luvdunhill

anyone know of a decent quality BNC->RCA adapter?

steve: the cubes in my office are made by this fellow, and the custom top is as well. I opted for cherry of course.

I would agree with the new Tango, but the old ones are very special IMHO. I finally fell in love with the Klyne and Pass phono stages and did away with such things... I hope postjack finds something that works for him!

what transformers do the bent audio mu step-ups use?

why go with these over the Lundahl / K&K step-up?

man, I need some expensive cutters too

yup, you can even order the pad separate from the arcs. Both are $50. I ordered from Yama's

hi all! I was wondering if anyone here would be willing to turn a wood motor pod for a project I am working on. I have a custom aluminum plate that I'd like to press fit into a simple, wood cylinder that would include a cutout for the motor itself that would run right down the middle. The outside diameter would be 120mm and the height would be just enough to accommodate my Nottingham turntable, so 4-5". If anyone is interested, I can supply detailed drawings for the top plate and we can talk price Thanks!

I just salvaged $50 worth of parts using a relatively new $30 "hot solder sucker". Gotta love when tools pay for themselves. Great little tool, much better than the Rat Shack bulb desoldering iron. A few words of wisdom. Two hot tools on your bench is one too many... and the "sucker" can "blow" as well.................. when depressing the plunger.

I don't know if this helps, but the Kimber standard spade fits quite nicely on the narrow-ish barrier strips that the Vandersteen speakers use. Perhaps they would fit on these amps as well?

well, if you're not there on Saturday, then you have to wait until Tuesday as they don't work on Mondays.

on a napkin, but it's the same schematic that is inside your amp.

as bad as UPS has been, I think Fed Ex Home Delivery is 1000 times worse. I will never use either again.

I have traced the circuit for this amp... uhm, I have to agree with Spritzer, it's not really mod worthy. "next please!"

battery for Nottingham motor upgrade project

audiogon is decent... I buy most of my stuff local, half priced books, goodwill, salvation army, craig's list, etc.

right, due to the whole charging thing... but, definitely nothing on a geological scale (i.e. K701) I would say that the ESP-950 took a week or so, as my replacement drivers were brand new.

congrats!

I know there is an Air Tight arm with this feature, as well as the Goldmund T8. An excerpt from here: http://www.goldmund.com/products/reference/ "Motor-driven VTA adjustment with remote-control, allowing height calibration within 1/10 of a millimeter"

the SR-007 has the cable soldered directly to the stators via very thin pieces of silver foil. The "connector" looking thing is simply for strain relief.

wow, that really sucks... maybe I should have really layed into how crappy those Pioneer transports are... I try not to be a kill-joy when people get new toys, but these damn things suck so much I really should have made an exception. I've had good luck with www.electronix.com for replacement gears and such...

I won't tell nenso

actually, it sounded really really good, as the stands are definitely the weak link in the lower end models... that's why the Mye stand upgrade is so great....

price range? I'd check out Michael Percy and if those are too expensive, try these: http://www.vt4c.com/shop/program/main.php?cat_id=60&group_id=2