luvdunhill

right, so think of it this way. If there was indeed a resistor from each RCA to ground, they would in effect be paralleled with each other. So, a single resistor in this case is equivalent.

perhaps, assuming that there is no continuity from one RCA earth to the other RCA earth. If there is continuity, then that means the outputs share a ground and that single resistor serves as a ground breaker for both outputs.

Hey Pete: How does the SME setup jig work? Could you perhaps post a picture of it?

ah, ok well, if Spritzer's currency drops through the floor again and starts selling things off, talk to him about a certain pair of heat sinks he has

Duggeh: Would you be at all opposed to transplanting the F5 inside the current Aleph? We could run some numbers on the toroid and the PSU, but it might just work ...

"lamp cord spool"

A Zobel network shouldn't be necessary with the Dynafet due to the feedback design. If you want this sort of protection, and output choke might be a better choice. For example, say you're using a Piezo tweeter in your speaker design. In this case, the load doesn't tend to be inductive at high frequencies, but capacitive. In this case, the Zobel network is a poor choice and the output choke would better protect your speakers. The problem is that the values in the Zobel need to be chosen carefully with respect to the design for optimum performance. With this said, the only person at this point who can really comment on this is Kevin, so I'll freely admit this is just speculation on my part.

first hit on google seems to have it for $0.19 a foot.

I agree, looks fantastic! What about Justin's suggestion of the input filter? Here's one that I used, and I've also swapped the location of R34-R35 to be after the caps. I'm partial to polystyrene caps here (e.g. Newark 96K9640), but micas are another possibility. While we're on the subject of caps, I've had very good luck using Teflon (PTFE) caps in feedback loops. Would it be possible to add a second pad to support this? This would not be a standard option, but more for me to tweak with The Voltronics stuff at Mouser is good, but very expensive. Another choice would be Vishay/BC sold at Newark. Both places, just search for "PTFE trimmer". All that really needs to be added is one pad... what that be possible? Finally, what about adding the Wima FKP2 bypasses? I still think this is a good idea wherever possible.

I was referring to the input transformers

so, is there a ground plane on both sides of the board? I know amb does this with his boards a lot... I'll look over it some more tomorrow... edit: also, I would recommend cutting off the ground plane around the output devices, or is that what the dashed line is for? I'm confused I suppose

hey, do you have any rough costs for case cost? any estimates from your beta22 builds would probably be right on, plus the differential cost in the cases. Also, the transformers come in a PCB version.. it would be cool if those got integrated into the I/O boards. If you can get OEM cost, I could probably get some other people interested as well to help the numbers.

sure, just PM me anytime Back to your regularly scheduled program!

I don't have any PSU boards, but I do in fact have some boards if you'd like, just like the ones above. I'll sell them for $15 for a stereo pair and I'll pay shipping and PayPal fees. If you don't do anything with them, it won't hurt my feelings. Just think of me as a DIY enabler Also, you can get an F5 "kit" from tech-diy that I can order for you and shove in the envelope. See here: http://tech-diy.com/Store/CloneKits.htm Of course, the real cost is the case and the power supply....

you can practically count the number of components on 2 hands for this one. Maybe I can get some secret camera footage of swt61 doing a F5 for your viewing pleasure.

F5

I'd appreciate it not being open to the outside world. I got all kinds of spam from the Pearl deal and I'm trying to keep this small enough to be advantageous from a cost standpoint but not unwieldy. Plus, I'm counting on the group to help weed out :asshat:s, as this could be a serious drag.

oh, I forgot about -=her=- ... thanks for the reminder.

yeah, good luck with that

1x Copper Flat Bar .500" x 3" x 12" - Class II 1x 3003 Perforated Aluminum Sheet .063" x 24" x 24" 2x 6061-T6 Aluminum Square Bar .375" x .375" x 48" UPS shipping Total: $60 seems to be an extremely good deal, we'll see what it looks like when it gets here.

With the GBP in the crapper, I think now would be a good time to try some Sowther transformers for conversion

SMD resistors can get very exotic. Susumu has some 5ppm, 0.1% parts as does Alpha: http://www.susumu.co.jp/english/pdf/products-j01-04.pdf [url=http://www.alpha-elec.co.jp/e_machine.html]Alpha Electronics Corp.

I like Susumu and the KOA RK73A. I believe both DACT and Goldpoint use KOA resistors.

would tombstoning these resistors be acceptable?