luvdunhill

Dusty, is this you?

Ok, one lot left. Wayne?

I compared them on a curve tracer and they were identical both directions. So, seemed good enough for me.

Maybe just measure the Idss and the pinch-off voltage instead? You are never going to use these at such low circuit parameters...

Looking to sell some odds and ends, maybe of interest to folks here: Pictures! https://imgur.com/gallery/k6EAWkv Lot 0: 1 x Dartboard Accessory - One80 - Patented - Rotafix - Dartboard Holder - Black (DBX012) Asking $10, if included with any lot below. 
Lot 1: 1 x Robson Plus Dart Flights - for use Nylon or Aluminium Shafts - High Durability - Standard No6 - Black (FL106) 1 x Robson Plus Dart Flights - for use Nylon or Aluminium Shafts - High Durability - Standard - Black (FL001) 1 x L Style - L Flights - Dart Flights - Champagne Ring - Dimple - Shape - Solid - Black (LS079) 1 x L Style - L Shafts - Straight 130 - 27mm - Clear Black - Locked - Extra Short (LS175) - L-Style Champaign Standard Black Flights - L-Style Champaign caps (2 spare) - L-Style Laro C-140 Clear Black One set of Robsons were never thrown and the other maybe a dozen times. They are in great condition. The L-Style flights all have champaign caps in them and all have been thrown a bit, but are in good shape. There are 2 extra caps. The Laro are more like standard stems, look them up! Asking $25 shipped for the lot. Lot 2: Viper Flight Punch 1 x Target Pro Grip Vision Shafts - Extreme Grip Stems - with Pro Grip Rings - Size 1 - 34mm - Short - Vision Clear (S0227) 1 x Target Stems - Carbon Ti Pro Shafts - High Performance Titanium - Natural - Short (S0531) 1 x Target Slot Lock Grip Rings - Strong Stem Accessory - (Pigeon Rings) - Slim - Black (X2010) 2 x Target Titanium Slot Lock Rings - Extra Tough Stem Accessory - (Pigeon Rings) - Slim - Titanium (X2050) 2 x Target Titanium Pro Grip Rings - Extra Tough Stem Accessory - (Pigeon Rings) - Slim - Titanium (X2037) 1 x Winmau Prism 1.0 Dart Shafts - Stems with Pro-Lock Rings - 28mm - Extra Short - Black Tint (S0997) - Target Carbon-Ti Spare Tops - 6 sets of bagged Target Vision Ultra and similar flights Asking $25 shipped for the lot. Lot 3: ONE80 90% Tungsten Darts Heat T1 24g Casemaster Select Dart Case https://www.amazon.com/gp/product/B001FWQK56 Includes 6 aluminum stems, 15 Target Pro-Grip stems, 12 Target Vision flights or similar (new) and many slightly used flights. Asking $30 shipped for the lot.

Yes you can. As I mention above, when laying out boards this can be exploited to ensure better signal routing.

That’s because it’s a JFET. Most (all?) are symmetrical.

Obvious you need a Milgauss! Any new colors, or is the Blue Dial / Green Glass still most current?

2009 Lusi. Would smoke again. Will smoke again.

Here is my current dart setup. I am getting a second set repointed as we speak. Datadart Orion Ringed 22g Target Storm points smooth gold 30mm Cosmo Fit Shaft Gear (Size 1, clear, slim) Cosmo Air Standard flights clear black.

Not a pretty one, but:

I 3d printed a mount for a 1 gen iPad mini and after about 4 downloads, finally found an app that works well with iOS 9 and in portrait mode.

I am guessing that’s why the prices in the G3 seem to vary so much. Anyways, in my 10 minutes of free time today, I installed one: Just remember that the Rotafix will move the board out from the wall a bit, so you will need to adjust your oche line. I now understand why the ring lights are a thing - shadows. I installed a pair of these: https://www.amazon.com/gp/aw/d/B07B4G4JNH?psc=1&ref=ppx_pop_mob_b_pd_title ... and basically the shadows are pretty distracting. I can provide a night time picture later

Here is where we are at now. My second G3 didn’t include a Rotafix Mount! I guess some do and some don’t? I ordered a second one (with some expensive flight systems and micro-length stems). Curious how long this will last out in the elements. I suppose I could bring it in, but lazy. I am also looking for some lights. Probably cheap battery powered jobs? Maybe also a better number ring...

Yes, the G3 uses a rotafix mount and they are available separately. They might require a bit of tweaking to work with the other boards (and lighting systems choices) but should be straightforward and once mounted super easy to rotate and swap out. I will take some pictures later this week for you. I am going to adapt a cheap board for my patio next week. Here are some pictures of punched flights and the Robson molded flights

Shipping to the US is pretty minimal, unless you choose expedited shipping. My orders usually arrive in 10 days or so and as long as I am ordering darts and accessories it’s $2.95. Three other items I would also consider. Some sort of throw line or mat. If you have hard floors in your room, you could consider an integrated throw line and mat, to protect the darts as they fall from deflections. If not a mat, then I like the Target “glow in the dark” adhesive throw line. Second, a lighting system, depending on what your ambient light situation looks like. These items are a bit harder to find in the US for reasonable prices, so perhaps better to save for one of your UK trips. The Target lights are what I am looking to get once I find a more permanent spot for my setup at home, or considering just making my own with my 3D printer. There are lots of good options though, just not any cheap options Lastly, since you have the G3, buy some of the extra rotofix mounts for your other two boards. These mounts are great in that they make rotating the board a snap and swapping out the boards easy as well. I am thinking about getting an extra so I can move my board outside as well. The “Fives Boards” look cool. I have seen them at DartsCorner. You might also check out the other games they have there (golf and snooker, if I remember correctly) as well as Blade 5 “green zone” that has a handicap system and is used in the Junior Darts Leagues.

Nice Wayne! I have tried all three boards and would suggest the G3 as the best of the bunch, especially since Brent refuses to comment on this thread and backed a different choice earlier. I would also suggest you start buying darts from https://www.dartscorner.co.uk/ as there is a much better selection that what is available on Amazon and much better pricing. Next, look at buying an assortment of stem lengths, as pairing these to your darts and throwing style takes some experimentation. My particular journey has ended up with polycarbonate. My warning with the aluminum stems in particular is they tend to very slightly bend and it’s hard to tell when this occurs and impacts your throw quite a bit. Once you find a length that you like, you can consider various stem/flight systems. I am currently using the Robson flights for example and these are very durable. I also have started punching my non-molded flights and that has cut down on flights popping off. Can’t wait to see some pictures of your setups!

For sale! https://m.imgur.com/a/Zxj3EWw Not for sale!

Probably also have a set of Winmau Navigators for sale. Various stems sizes and flights that could be easily thrown in as well.

I also have a 9F. Pretty wonderful watch, enjoy!

Anyone interested in a set of Bottelsen Aces High? They are 90% tungsten steel tips at 24g. Can provide a mixture of stems (aluminum and nylon) and flights with them. Just need to downsize a bit.

This might help: http://www.firstwatt.com/pdf/art_leave_classa.pdf