Jump to content

spritzer

High Rollers
  • Posts

    14,530
  • Joined

  • Last visited

  • Days Won

    24

Everything posted by spritzer

  1. No, that's an opamp.
  2. Digital, high res, DSD with quantum particles and string theory added for better plankton retrieval.
  3. I very much prefer a layered and deep soundstage over a bloated one. I also wouldn't call the Stax sets the colored ones as well...I could hear the big far imprint of the amp all over. Mosfets sound like shit basically...think Cavalli and you know what I mean.
  4. LSK489/LSJ689 work great. I've also used the MAT02/MAT03.
  5. It isn't but one can make silly expensive adapters.
  6. I love the upgrades...this sure as hell is not meant for normal users.
  7. I recognize that view...
  8. It was my pleasure. I did have a lot of fun with it and would want nothing more than to get just the headphones to play with.
  9. A lot of the tracks you will never have heard of as they are Icelandic and I got close to the studio masters. There was some common stuff in there too, Steely Dan, Tom Petty etc. just because of their recent passing and they match certain aspects I want to test for. I don't go for the typical audiophile stuff though, can't stand most of it really as any system should be able to reproduce both the well recorded stuff and the awful as well. When you go to an audio show, you can often spot when they are trying to hide certain issues with the systems by what music is playing. The Sennheiser guys also had some tracks one electronic track made the HE90 crap out. They were way too high in volume and the sheer amount of bass made them loose charge.
  10. 5 contacts will allow for single ended use as well if the amp can handle it.
  11. They didn't have a lot of time to compare as damn customers were annoying them. They did spend some time with it and did manage to overload the HE90...they needed a time out after that. I seriously need to modify those drivers.
  12. Time for some impressions of this rare beast. The Icelandic distributor has a set on loan and they carved an entire afternoon out of the schedule for me to try it and do some comparisons. I showed up with the HE90 I built from spare parts, Aristaeus, Carbon amp and a port modded SR-007Mk2. Since they were using the built in dac on the HE-1, I just plugged both amps into as well to equalize the comparison. Over all, I like the build quality of the headphones. Imagine a HD800 built properly and you are pretty much there. The leather earpads are super nice and the headband has nice extension to even fit my large melon. I don't think they are super comfy though as they are fucking heavy (550gr) and all of the pressure is on the top of the head. The Stax 4070 is just about as heavy but far more comfy due to the suspended headband design. The earcups get a bit warm due to the internal amps but only about 5-7°C above ambient. The cable is also pretty nice and not microphonic at all but more on the amps etc. later. Amp itself...well it is just fucked up. I get that they were trying to cater to some nouveau-riche people who just want something expensive but the wank factor is off the charts. I also have serious doubts about what's hiding in that nice marble shell... As for the headphones them selves... well the drivers look pretty much identical to the HE90 units and the few pictures of them that exist, point to that. I wanted to rip off the earpads to check further but people get antsy with something this expensive... One worrying thing I noticed though is that both sides of the drivers have porous dust covers. They look identical to the woven nylon found on the HE90 and well...I would expect solid covers. Now for some actual impressions. As I said above the HE-1 dac was the source for all the amps. To that you have to turn off the headphones so no direct comparisons were possible but I know how both systems should sound so not a big problem there. The source feeding the HE-1 was a Macbook Pro running itunes but I bypassed that with my own FLAC files and player. There are some major changes compared to the older system, this one can do bass and isn't as horribly colored either but over all...I was not impressed and the system never made me really interested in the music. It doesn't engage like a good 007 system can, where I sometimes just sit in awe even after owning a set for all these years. Here, it just doesn't pull me in. This is clearly a midrange issue as there just isn't enough presence there. First off the major issues are the bass, treble and the soundstage. Let's start with the bass, it has this annoying hump to it sort of like the old Lambdas. I'm not sure if this is the mosfet driver (could be, the Cavalli crap boxes have similar issues) or the headphones but it is a clear coloration and once you notice it, just annoys the fuck out of me. Now on some tracks it wasn't as noticeable but always lurking in the background none the less. Next up is the treble...which is both subdued and bright at the same time. I know plenty of people complain the 007's lack sparkle and with the Mk1 this was mostly true but they could be bright if the source called for it. The HE-1 manages something different, the treble is just flat and boring but then it suddenly bites hard. Now I was listening at higher levels but still nothing super loud, only about 12 o'clock on the dial. This also wasn't like the upper midrange bite of the 009's, more lower treble fizz but the source material didn't call for this. I'm so used to listening to SR-X Mk3 Pro drivers now (which are pretty much the gold standard for treble) as they are in my DIY headphones and nope, nothing like this. I suspect the amp is a huge influence here too but no way to verify that... Last major issue, the soundstage. Many will know my stance on the old HE90 where it sounds like you are listening to some people playing in dense fog and you can't quite make out where they are. This time around it is much improved but the lack of pin point accuracy is still apparent. The soundstage is also a bit too far away for my liking and it just doesn't throw the same huge headspace the 007's can. This also affects the midrange and the whole "disconnected" feeling I got from the whole system. I once reached for my phone as I was just a bit bored listening to it. Over all I like that Sennheiser built this but they really should have spent more time on the electronics. I don't think there are any improvements to moving the amps to the cups over something like the Carbon where I can burn 50+W as heat and overcome the small capacitance in the cable. Next post will discuss the tech specs of the system but I'll end with another picture of it all... It was really dark in there and I suck at taking pictures... Now for some technical discussion. I found the specs in the back of the manual and it turns out the bias is 650VDC and the amps run at +780VDC. This makes this more than compatible with Stax so I see no issue with removing the internal amps and rewiring one of these for Stax use. I have been asked to that before but I'm really hesitant to mess with something this expensive. That said, moving to proper amps which are not just the HEV70 rehashed can only be an improvement. I've never found any mosfet device with sufficiently low Cob to work in this role so I truly don't get what Senn were thinking. Some other info, the entire amp only consumes 40W per the user manual which doesn't leave a lot for the actual amps. So we have 8 tubes running with heaters plus all the motors in there. HV supply for the tubes, another for the output stage and well...not a whole lot of power to spare here. Compare that to the BHSE, Carbon or even the T2. All of them use far more power and it is just for one goal, to power the headphones. I also played around with the amp and I could swear that the volume control feels like a RK27. No way to know but how it felt when moving to the extremes...it was just like a RK27. Now as a proper volume control aficionado... ... they all feel a bit different. TKD feels nothing like a P+G or a RK50... Until somebody opens one of these up, take it how you will. It is also clearly a volume pot and not a chip or some other setup.
  13. I like it and that ground planes are fancy... I do spend a lot of time on my ground planes though.
  14. Yeah, the ST ones certainly overshot with no load.
  15. Ok, found them...
  16. Dan has claimed they are using at least 0.6mm D/S spacing or even more so yeah, these won't be easy to drive at all. Super low sensitivity doesn't match all that well with the "cheap" angle either. If a Carbon can't drive them, what the hell can? It has more power than any other amp out there... I'm designing my own drivers and using 0.5mm spacers is dead simple. To me they took the easy way out... I do like the stator design and I will naturally tear one of these down and show how they are made. That connector though...what the actual fuck? Looks like a D25 shell and that's good for some reason?
  17. I like that one a lot. I'll dig out the new boards tomorrow and take a picture.
  18. Yup...(with the Single Power ES-2 half built in the corner of the room)... they sure can be.
  19. Worth more than what, the raw materials in them? Broken amps aren't usually worth a whole lot...
  20. At least three people stepped in as CEO's or sales managers of Cavalli over the years and I heard they all paid a huge investment for those positions. That was really the issue with Cavalli aside from amps needing a lot of servicing and not being made to be serviced, too many fingers in the pot. I spent a lot of time working on the LLMk1 and ended up completely rebuilding it. New PSU, new output stage, new input stage, new gain stage and even a new transformer. I lost a pile of money on it too but I knew that going in. We do this because shitty products should be exposed. I was at the local Senn dealer today to setup my HE-1 audition (tried to get them to bring it to my place but no dice ) but while there they were asking my advice on some amp designs and one of the guys said "you are always so negative about the designs!!". I said "true but that's because for every Headamp amp that is built properly you have dozens of posers who don't have a clue what they are doing. If they were charging 250$ then who cares but 10K$ for the Goldmund pile of fail is just too much to take." That's pretty much what sums it up for me, nothing has changed from 2005 when nobody wanted to discuss the amps in detail. It was all about the beautiful, beautiful music and any dissent to that was crushed. This is a wider subject for me though as people are willing to swallow just about anything, regardless of how stupid it is. Just see something like Elon Musk's "Hyperloop" or classics like Solar roadways... Stupid and bad shit needs to be called out.
  21. Goes to show how delusional his fanbase/worshippers were. All of it was great despite what the empirical data said but then again, none of them paid even close to retail for this junk. A lot of people were cheated though as he burned through investors money time and time again. Claiming Alex "sacrificed" is just a load of bollocks.
  22. So if the - input is floating, you will get a whole host of issues.
  23. Why would you not ground the - input? It should never be left floating like that. Ohhh and what mosfets are you referring to? The Dynahi should have bipolar outputs...
  24. Not Cavalli Audio but Massdrop is having these built using Cavalli circuits...well as far as that goes at least.
  25. Setting the right temperature is key but even if you lift a pad, it's not that bad here. Easy to jumper everything as needed.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.