spritzer

Thanks for the list not that I need any more sources or headphones after my most recent shopping spree...

Massive line sources tend to make believers out of just about anybody...

Great impressions but plug those ports and the bass is even better and the midrange is the best you can get with no "shout" on the vocals... There is no other headphone I would rather use for rock though some of the classic 60's stuff sounds sublime on the SR-3/SRA-3S combo.

Quoting the above video... "Holy shit!!!"

Did the original Naim CDS use S1 chips?

That's very cool! I know that there is a set in my future once I can find a place that's big enough with the ceiling height to match.

If they are anything short of a triple stacked Quad ESL or Sound Lab Majestic's then no...

Ouch!!! That's a lot for some chips. Btw. Have you heard anything from Alex about your player?

If anybody wants a DAC with S2 chips look no further...

I think that the D5000 mod only sounds like the R10 in markl's own idiotic mind. The fact that he thinks Rudi's amps are good speaks volumes... You can force them to squeal like every other ESP but it's not normal. The fart is a pretty silly name for it...

The Marantz CD-7 is on my hitlist... I think I'll stick with my inferior chips for now...

Get a new amp and report back... ...

You might be over damping the driver or putting too much pressure on the top of it and thus more tension on the diaphragm.

Dac rolling is the new frontier...

Rikens rule but I wish that there were two crowns on those chips... Thanks, these old, cheap Canon's are pretty good and this one is heavy enough to be stable in my hands. I'm way too lazy to use a tripod...

Crap!!! Will do when I can stop listening to the damn thing...

Add the AudioZone to the mix and I have two very pretty DAC's...

It's not in the same league... not even close. It lacks the organic flow and amazing detail retrieval of the APL unit and same goes for bass and treble extension. Considering the price difference I don't mind and a better comparison would be between the DAS-R1 and the AudioZone NOS DAC I have in my computer rig. I don't have a good transport so that comparison will have to wait for a better time.

FOTM FTW!!!

Makes the Meridian G08 sound like the POS it really is and stands up to expensive contemporary gear. It does lack the HF sparkle of newer units but after listening to it for months on end I don't know where all this digitalis crap came from. It simply sounds sublime, musical and slightly dark, with great bass detail and slam. It should be even better with the CDP-R1 as it's clock linked. The only thing I'd like to change are the connectors, BNC for the digital in and silver WBT's for output with upgraded wiring and a built in 230->100v transformer. The digital input board is in a fully shielded cage under the DAC/output board and it's littered with chips. Btw. If you want the service manual with full schematics just let me know. Truly masssive at more then 20kg as well. Check out the solid copper back panel...

As promised here are some pics of the first reference level CDP Sony ever made, well one half of it. Released in 1987 it's built to a standard Sony can only dream off today with solid copper panels and huge transformers for it's meager 25w draw.

Since this post would get lost in the ever growing Stax thread I'll post it here. If you damage your expensive phones doing this it's your own fault so don't come running to me. Be very careful with any tools this close to the drivers as one slip can destroy them. You have been warned!!! All you need to do this mod is some blutack, a screwdriver and the patience of a saint to get the damn pads on again. First job if to remove the earpads by simply pulling onto the top edge and they come off. Also remove the spring underneath as it will only be in the way. Simply pull it out of the rubber grommet. Now there is a black plate with 4 screws holding it to the phones together. Just above the cable entry is a small notch cut into the plastic surrounding the driver and that's the port that needs to be plugged. I'm sure that stuffing blutack here will seal it but since I haven't tested it I will only suggest it as a theory. Remove the 4 screws in the black plate and the earpieces are free from the arc assembly (be careful not to drop them!!) and it looks like this. The port is the cut out above the cable assembly and vents through it. Fill it up with blutack so that is looks something like this: Assemble the phones and your Mk2/A now sounds like it should have in the first place.

Reaching as far down as the 4070 can but with real bass and not some clinical showcase of what should be there. None of the stuff I listen to reaches all that far down but the Mk2 has trouble replicating deepest bass drum and organ tones while the Mk1 can do it effortlessly. Tell me about it. Fixing glue failures is possible if you are brave (stupid) enough but misaligned stators... It's really easy to construct a cable that beats most out there but if you are OCD like me it can take hours for a simple 75cm stereo cable. It's all about the damping...

The silver's quality is a huge factor as is the insulation. Soft or age annealed silver wire, small gauge (28AWG+) and solid core has worked best for me so far and I can't see any reason to start upgrading. Making you own cables is easy and allows you to use the exact same stuff inside the components. I'll post some pictures of the mod when I have time but it might have to wait until the weekend. I think the figure is close to 90% of dust particles are positively charged but you only need one to mess up the drivers. \