recstar24

Really. Read about it at axpona. The weird thing is you have to convert the original recording source to digital, which then gets converted into some kind of 3D topographic map which then feeds the laser based cutter which then makes the stamper ill take my non HD AAA sourced vinyl just fine.

INFO PLEASE

You got it. I’m pretty happy with my vinyl rig, the 1200GR with ortofon 2m blue is a nice match. I like my Hagerman but I would say it’s probably the limiting part in my rig and I would be curious what the next level in phono stage has to offer.

Let me know your thoughts on the sound once you’ve had a chance to break it in a bit. Or feel free to bring it over here for a beer and listen to some vinyl at my place

The 103 has been such a centerpiece for everything in my rig audio visual. I give oppo much respect and wish them the best in future endeavors.

Happy birthday! Hope you weren't too busy soldering

Dungen - ta det lugnt 2016 vinyl repress. All analog pressing! Sounds killer. Bought the CD when it first came out and while the music was great the sound was pretty compressed (vinyl was cut from CD master). This repress is super punchy and dynamic without being harsh.

VMP blue note exclusive #3!

Don’t forget the phono stage you were planning on too

After looking online at all sorts of random devices/gadgets, from Jensen isolating transformers ($200) to $80 power plug hum eliminators (little devices that plug at the outlet that have diodes in between the wall and plug grounds), I figured it prudent to see if just plugging the turntable through an extension into the zerosurge that has the whole rest of the system plugged into it would eliminate the ground loop. Yup it did! lol. I used a generic power strip to check so I just ordered a standard extension cord (14awg 15a, matched the supplied power cord with the technics) for a few bucks. I'm sure I can probably just order a longer power cord to replace the whole darn thing as well. I guess sometimes it's the simplest solution that is the most ideal.

Not conclusive. Hum still present, but it appears it's lower in level? That could be my brain doing tricks on me, as I also noticed the hum level appears to change in the previous orientation (sometimes louder, sometimes softer). I can also confirm that it's 60 hz hum - I have a strobosoft tuner and just put right next to the speaker woofer; and it shows up as the pitch B 60 hz.

Do you mean plug in the 2 prong phono cord in the other direction with the 3 prong turntable power cord and see if it changes?

Have a question regarding ground loop hum. Was able to pinpoint it to my turntable, 3 prong power cord on same duplex as my phono stage which is 2 prong. The turntable and phono is on a completely different section/wall of the room and unfortunately cannot route them to the rest of the rig plugged into my zerosurge. Easiest and cheapest thing to do would use a cheater plug, but would it be safe to assume that lifting the ground isn't necessarily the safest thing to do? They sell humbuster devices which appear to be small isolation transformers but are expensive. Open to ideas!

Au cheval burger but a Normal wait? Sign me up man...

I'm happy to chauffeur if needed. Honda Odyssey soccer mom van ftw (ask Jeff and Bryan)

Just throwing out there that I plan on being there on Saturday April 14 and would love to hang with anyone. Looking forward to spending way too much money in the new “record shop” as my two primary online vinyl places - acoustic sounds and elusive disc - will be there. I’ll plan on stopping by those manufacturers of gear I own just to say hi and chew the fat a little bit (emotiva, wyred4sound), and even though I don’t have a uturn table anymore, I’d love to just say hi to uturn audio. And justin! Go headamp. Let me know if you plan on coming, maybe I can help organize a dinner for us and the out of towners.

What kind of weight/puck is that?

Happy birthday Mike! Hope you are doing well and it was great to see you recently!

ECP headphone power amp - now that's the sex

Happy belated John! Glad to hear it was a good one, hope to see you soon!

The pico slim I believe is a very high quality buffer with excellent channel balance made specifically for iems, correct?

DAC not important, current my DAC usage is comcast cable box and oppo output for movies and TV. Really just need a decent preamp but balanced output with a legitimate single ended to balance conversion for the TT.

https://wyred4sound.com/products/pre-amps/mpre would love to hear anyone's thoughts on this. For the price it looks too good to be true. I've been eyeing on an upgrade on my emotiva dc1 for a while, more so as a preamp vs DAC (so far my DAC usage has been cable tv from the oppo and Apple TV optical for tv/movie purposes). Fully discrete dual differential balanced both on the input and output side, but the kicker for me is that it will take the rca in and perform the balanced output "correctly" to feed my stealth monitors. Below is from the designer commenting in a 6moons review. http://www.6moons.com/audioreviews/wyred8/3.html

Analogue Productions 45 mastered by George Marino. Who needs the DCC anyways - this one sounds great.