swt61

That's 1 TB! Holy crap I had no idea that much gay porn had been produced! Your people are really playin' catch up huh?

They add a tad bit of bass to the HD580, but are remarkably similar in SQ to the stock grills. And that's not a bad thing IMO.

That's awfully brave for a guy with so many projects on my workbench!

I'm not going to push them, because they're fairly labor intensive, but I'd be willing to make them upon request. Yeah they are pretty fugly, and I would send them your way just to get them off my hands, but these are for a Head-Fi customer, so the laugh's on him.

I just had that same conversation with warrior05. If they were going on my Black HD580 I'd use Black mesh too. I'm hoping the stainless will work well with the Silver/Grey of the HD650.

Finished.

That's a tough one. They are each a little different, but both have qualities I like, and each are very good. I guess Id have to say I'd give a slight nod to the ?22, but not enough so as to keep unhooking the speakers for headphone use. I'm very pleased with the Consonance. Once the Gizmo T-amp is ready for retail I still plan on trying it as well.

Will there be anyone on this site besides myself listening to dynamic headphones in a year? Congrats deepak!

Knowing you Nate you'll have sold it long before you'd get to adding the wood trim anyway. I for one hope you keep and enjoy that beautiful monster for a long time to come. It's quite an incredible build!

I'm loving my Omega Grande Six, but they also need a sub. I'm using AV123 Onix Rocket UFW-10 active subwoofers with great success. I was able to dial them in quite well, for a relatively seamless transition. All of the Cain & Cain speakers are quite nice IMO.

Happy Birthday!

:o :'( :'( > That truly sucks!

While there are a lot of good choices to amp the Senns., the balanced ?22 with balanced cables for the Senns. is a particularly high end choice IMO. It's just a great match, and shows just how incredibly high the Senns. can scale. Not long after I first joined the other site I bought some 650s. I had a Rega Ear amp at the time. I was completely underwhelmed, and sold them after about a month. But hearing them balanced on my ?22 was a completely different experience. All the things I had liked about them were there in spades, but the soundstage issues, veiled sound and somewhat sloppy bass I had heard with the Rega were completely nonexistent with the ?22. I ended up with 580s at that Dallas meet, but I do plan to get some 650s before long, and spend some quality time with them in my studio environment. If they impressed me so much in meet surroundings I can only imagine I'll love them even more at home.

It wasn't until getting the ?22 that I appreciated the Senns. So much so that I bought a pair of 580s at the same meet. I think the stainless mesh will help it match the Silver/Grey of the 650 housing somewhat. Actually the plainness of the headphone may work to set off the woodwork even more. But that was a very nice comment Duggeh, and I apologize for the stiffy.

Guess who's project is next in line?

Yes. I first traced the outline of the plastic grill onto the wood, then I used my scroll saw to cut just outside the line. I then used my oscillating sanding center to sand right to the line, and smooth things up. Then I set the fence on my router table to cut the little recess that fits inside the headphone housing. Next I set the fence so that I could leave about 1/4" thickness in the sides, and started with a plunge cut, then used the fence to guide my cut all the way around. It took several passes, raising the bit about 1/4" at a time. Once I had that done I drilled my port hole with a drill press and Forstner bit. Then I turned the cups over and finished hollowing out the cups with the Forstner. And finally back to the router table to clean things up with a bearing guided bit. As well as using part of a 1" round over bit to ease the top outside edges of the cups. The sanding was low tech, because I simply didn't have enough area to use any of my random orbit sanders. But hand sanding builds character.

The wood is very thin toward the top, about 1/8" - 3/16", and no more than 1/4" on the sides. And the Burl Maple is fairly light anyway. I'd say these are just slightly heavier than the stock plastic grills. My guess is no more than 1 ounce each.

Well since we already have this lovefest thread for my work, let me be completely socially unacceptable and post some work myself for your perusal. I'll try not to through my shoulder out. These are my first Sennheiser woody cups. I made them for an S

LOL! A third grader could only improve on that existing excuse for a faceplate!

Better yet that you were involved! Well all of the knobs and jacks have a back inlay of Gabon Ebony for one. And there was a lot going on inside the amp that dictated the proper placement of every item on the faceplate. The trim piece for his Eastsound CD5 was not much easier. It has several counterbored holes for the existing buttons that had to be spaced perfectly. I had Jay send me the stock chrome trim piece to use as a pattern, but he sent it in an envelop instead of a box, and it looked like a modern art piece when it reached me. That was a fun night of hammering and straitening, hoping it would still be useful as a pattern. Luck was with us though, and it worked out fine.

You're painting your Rockhopper Audio ?22? :o

It's pretty much a given that Head-Fi will become more and more sponsor driven. That's just the way it is, I hate to see it happen, but it's a business and that pays the bills.

That's the stand that started it all! My very first stand. Yes we talked about measurements, but if I'd have had them in person I could have done much better. What's really funny is that philodox's amp faceplate (Massive Attack) is about the most complex piece I've made for gear, and that was all from measurements only. I held my breath during the 15 day journey to Canada.

Yeah, I don't envy you, but here's wishing you the best outcome.

It was built to hold two headphones, and as luck would have it that's what Vicki will own (MDR-R10 and SR-007). I have tailored the curve of a headphone stand to the headphone it was meant for, but honestly the curve I use as standard almost always works well, as the headband generally molds to the curve.